ALL STATES & TERRITORIES
Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...
View full detailsShank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly. Old Part N...
View full detailsHelper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407
Hinge plate for the #7 spring jump assembly. Old Part No. 001-302
Spring bar for the #7 spring jump assembly. Old Part No. 125-036
Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201
#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910
Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102
Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...
View full detailsShinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...
View full detailsShinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard. Old Part Number...
View full details#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910
The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...
View full detailsHardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate...
View full details