Find the part you need:
This accumulator clamp suits both 10L and 20L accumulators. Alternate Part No.154-488
Toolbox to be attached to a plough, contains spare parts for a plough.
Rear tow hitch for the Agrowplow AP11. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, including the Rubber...
View full detailsThe rear tow hitch allows trailing implements to be hitched safely to the rear of the ripper and provides the facility for it to be connected via...
View full detailsAttach coulters to your plow to help break through the trash. The Swivel coulter assembly is fitted with 14" coulter and bearings. Fits into the sh...
View full detailsAttach coulters to your plow to help break through the trash. The Swivel coulter assembly is fitted with 14" coulter and bearings. Fits into the sh...
View full detailsBearing housing to suit bearings with outer diameter of 52mm, as found on the 15 notch disc assembly. Fits 138-3025
Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrodrill models.The distance betw...
View full detailsBearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325
Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325
SEALED DEEP GROOVE METRIC BALL BEARINGS
Sealed bearing, fits on a shaft 25mm and into hub or housing of 62mm in diameter. ID 25mm, OD62mm. Cylindrical. *Old Part No. 138-031
The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...
View full detailsBlade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank. This blade comes plain with no wear-reducing en...
View full detailsBlade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It has been hard-faced on all leading edges and ...
View full detailsBlade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It comes with 4 x tungsten tiles across the lead...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade to suit #7 Shank. Available with either tungsten hardfacing or tungsten tiles to extend the working life of your blade. The blade is supplied...
View full details