Find your local Agrowplow dealer
Find your local dealer
Soil care and innovation has been the driving force behind the AP91 broadacre plough, developed to make deep ripping for the farmer simpler, stronger and smarter.
Available with 3 m wheel centres in 9 and 12 m working widths built on a fully-welded 200x200x9 mm RHS frame, the AP91 is the ideal choice for efficient broadacre ripping.
The leading/trailing tyne design consists of a single row of shallow leading tynes working at depths of up to 450mm in-line and ahead of the trailing shanks, set to penetrate up to 600mm. This dual-action configuration reduces the draft requirements for the ripper, resulting in increased towing ability and has been proven to reduce fuel and time costs by up to 18%.
The Agrowplow AP91 is available in 17 or 23-row configurations, all based on Agrowplow's renowned #9 Shank Assembly. The #9 shank features a straight shank with a narrow profile that allows it to shatter compacted soil up to 600mm deep and reduce drawbar requirements. Full-length shinguards and Agrowplow's #9 blade offer unrivalled protection for your shanks, improving the overall lifespan of the wear parts.
The plough also features 3 sections with 10° down and 20° up section float. This allows the plough to follow the natural contours of your paddock while ensuring your soil is ripped to a consistent depth. Hydraulically-driven wings fold up to bring the width under 7 m to reduce escort requirements when transporting the machine.
A hydraulic level lift is included as standard, allowing full depth and angle control all from the tractor, allowing operators to quickly and easily adjust to changing soil conditions.
Some shank options are mutually exclusive or may be used only under specific circumstances or with particular configurations. Shank options may increase draft requirements. Consult your dealer before considering these options.
All effort has been made to ensure the information presented is correct however, features and specifications may change without notice. Weights, dimensions and specifications are an estimate for standard configurations only and may change slightly during the manufacturing process.