700 Coil Tyne

The 700 Coil Tyne was a tyne assembly used on earlier model Agrowdrills, including the AD3000, ADx00 series drills, and JPC 2000. It used a 25mm co...

25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts....

Bolt your tyne assembly onto your seed drill toolbars with the tyne clamp kit. Comes with Tyne clamp, bolt kit and wedge. Used in the 325, 425 and ...

Tyne clamp used as part of a tyne clamp assembly to secure Agrowdrill tynes to the machine toolbar. Suits 100mm x100mm RHS, for all 25mm coil sprin...

This point features a tungsten tile on the tip and leading edges with additional hardfacing to provide enhanced wear reduction in harsh environment...

Single seed tube that suits the 700 Coil Tyne. The outside diameter of tube is 38mm (1-1/2") and it has mounting hole threaded with 5/16" UNC.

Second seed tube that suits both 700 and 732 Coil Tyne Assemblies. Has an outside diameter of 38mm (1-1/2"). Supplied with mounting hardware (2 x...

Double chute kit for Agrowdrills fitted with 325, 425, 700, or 732 tynes. Comes with: Double Outlet Seed Cup 3 meter 38mm Hose Barflo Hose Clamp S...

Double chute kit suited to 325, 700, 732 tyne model. Comes with Double Outlet Seed Cup, 3 meter 31.75mm Hose Barflo, Hose Clamp, Seed Tube Rubber A...

*Old Part No. 133-157

Fastener kit for the 732, 700, 425, and 325 tyne assemblies. Used to secure the tyne bolt clamp (115-3009). Includes an M16x200 bolt, plus a nut an...

*Old Part No. 133-157

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

Second seed tube that enables double-chuting on tyne-based Agrowdrills. SUITS: 552, 425, 325, 732, and 700 tyne models Seed hose with an outside d...

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

The 700 Coil Tyne was a tyne assembly used on earlier model Agrowdrills, including the AD3000, ADx00 series drills, and JPC 2000. It used a 25mm co...