Skip to content
ABOUT AGROWPLOW CONTACT US

Agrowplow

Filters

  • SKU: 600-4360
    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50

    Decal Warning Chemical Hazard

    'Chemical Hazard' warning sticker. 90x50mm yellow and black sticker.

    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50
  • SKU: 600-4361
    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50

    Decal Warning Projectile Hazard

    'Projectile' warning sticker. 89x50mm yellow and black sticker.

    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50
  • SKU: 600-4357
    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50

    Decal Warning Wheel Explosion Hazard

    'Tyre or wheel explosion hazard' warning sticker. 89x50mm yellow and black sticker.

    $31.88 - $31.88
    $31.88
    $42.50
    $42.50 - $42.50
    $42.50
  • SKU: 026-2001
    Multiple SKU variants are available for this product
    $166.50 - $166.50
    $77.25
    $103.00
    $222.00 - $222.00
    $103.00

    Fertiliser Tube

    Fertiliser tubes allow for the delivery of fertiliser directly behind the plough shank. They can be fitted to the #9 shank assembly or any shank wi...

    View full details
    $166.50 - $166.50
    $77.25
    $103.00
    $222.00 - $222.00
    $103.00
  • SKU: 123-0003
    $728.25 - $728.25
    $728.25
    $971.00
    $971.00 - $971.00
    $971.00

    Furrower Assembly

    The furrower assembly fits to the rigid or hydraulic #8 or #9 Shank Assembly. It is designed to generate furrows and hills for raised bed cropping....

    View full details
    $728.25 - $728.25
    $728.25
    $971.00
    $971.00 - $971.00
    $971.00
  • SKU: 111-1006
    $400.50 - $400.50
    $400.50
    $534.00
    $534.00 - $534.00
    $534.00

    Furrower Blades

    The furrower blades form part of the ground engaging component from the furrower assembly (123-0003). The blades generate furrows and hills for rai...

    View full details
    $400.50 - $400.50
    $400.50
    $534.00
    $534.00 - $534.00
    $534.00
  • SKU: 111-2005
    $524.60 - $524.60
    $524.60
    $699.48
    $699.48 - $699.48
    $699.48

    Furrower Pitch Plate

    The furrower pitch plate fits to the #8 shank and secures the furrower blade (111-1006) with the use of the Tee Bolt (132-0060). Part of the furrow...

    View full details
    $524.60 - $524.60
    $524.60
    $699.48
    $699.48 - $699.48
    $699.48
  • SKU: 132-0060
    $108.68 - $108.68
    $108.68
    $144.90
    $144.90 - $144.90
    $144.90

    Furrower Tee Bolt

    The Furrower Tee Bolt secures the Furrower Blades (111-1006) to the Furrower Pitch Plate (111-2005) as part of the Furrower Assembly 123-0003. ...

    View full details
    $108.68 - $108.68
    $108.68
    $144.90
    $144.90 - $144.90
    $144.90
  • SKU: 115-3021
    $111.52 - $111.52
    $111.52
    $148.70
    $148.70 - $148.70
    $148.70

    GATE ADJUSTMENT LEVER

    $111.52 - $111.52
    $111.52
    $148.70
    $148.70 - $148.70
    $148.70
  • SKU: 154-4075
    $0.77 - $0.77
    $0.77
    $1.02
    $1.02 - $1.02
    $1.02

    Grease Nipple Straight 1/8" BSP

    $0.77 - $0.77
    $0.77
    $1.02
    $1.02 - $1.02
    $1.02
  • SKU: 115-7031
    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90

    GRUB SCREW M10 x 12 mm, SERRATED

    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90
  • SKU: 141-0019
    $0.52 - $0.52
    $0.52
    $0.70
    $0.70 - $0.70
    $0.70

    Hairclip 1"

    (141-4013) #9

    $0.52 - $0.52
    $0.52
    $0.70
    $0.70 - $0.70
    $0.70
  • SKU: 141-0019
    $0.52 - $0.52
    $0.52
    $0.70
    $0.70 - $0.70
    $0.70

    Hairclip 1"

    (141-4013) #9

    $0.52 - $0.52
    $0.52
    $0.70
    $0.70 - $0.70
    $0.70
  • SKU: 019-2005
    $74.88 - $74.88
    $74.88
    $96.00
    $96.00 - $96.00
    $96.00

    HARROW LEG SPRING ASSEMBLY

    Harrow sub assembly. Take the working width of the machine, divide by 0.2m and use that number of assemblies to calculate the material required fo...

    View full details
    $74.88 - $74.88
    $74.88
    $96.00
    $96.00 - $96.00
    $96.00
  • SKU: 027-3012
    $386.32 - $386.32
    $386.32
    $515.10
    $515.10 - $515.10
    $515.10

    HD Shank Inversion Point

    Hardfaced inversion point for the AP102 plough. Should be fitted on the HD Shank alongside the inversion shinguard.

    $386.32 - $386.32
    $386.32
    $515.10
    $515.10 - $515.10
    $515.10
  • Replaceable inversion shinguard for the AP102 HD shank
    SKU: 027-3011
    $198.00 - $198.00
    $198.00
    $265.00
    $265.00 - $265.00
    $265.00

    HD Shank Inversion Shinguard

    Hardfaced inversion shinguard for the AP102 plough's HD Shank. Should be fitted on the HD Shank alongside the inversion point.

    $198.00 - $198.00
    $198.00
    $265.00
    $265.00 - $265.00
    $265.00
  • SKU: 027-3003
    $421.50 - $421.50
    $421.50
    $562.00
    $562.00 - $562.00
    $562.00

    HD Shank Point

    Built exclusively for the AP102 deep ripper, this heavy-duty hardfaced point is built tough and ready for the rigours of ripping down to 750 mm.

    $421.50 - $421.50
    $421.50
    $562.00
    $562.00 - $562.00
    $562.00
  • SKU: 027-2011
    $315.00 - $315.00
    $315.00
    $420.00
    $420.00 - $420.00
    $420.00

    HD SHANK SWEEP 400 WIDE

    $315.00 - $315.00
    $315.00
    $420.00
    $420.00 - $420.00
    $420.00
  • SKU: 155-1007
    $2.68 - $2.68
    $2.68
    $3.56
    $3.56 - $3.56
    $3.56

    HOSE CLAMP 25-51mm Stainless Steel

    Hose clamp is utilised on the 425 Tyne Assembly to hold the 38mm Barflo hose onto the Seed tube.

    $2.68 - $2.68
    $2.68
    $3.56
    $3.56 - $3.56
    $3.56
  • SKU: 139-2028
    $4.50 - $4.50
    $4.50
    $6.00
    $6.00 - $6.00
    $6.00

    HT DUST CAP

    $4.50 - $4.50
    $4.50
    $6.00
    $6.00 - $6.00
    $6.00
  • SKU: 154-4100
    $14.57 - $14.57
    $14.57
    $19.43
    $19.43 - $19.43
    $19.43

    HYD CLAMP BLOCK 2D 14mm

    $14.57 - $14.57
    $14.57
    $19.43
    $19.43 - $19.43
    $19.43
  • SKU: 154-4160
    $9.60 - $9.60
    $9.60
    $12.80
    $12.80 - $12.80
    $12.80

    HYD CLAMP BLOCK 3D 19mm

    $9.60 - $9.60
    $9.60
    $12.80
    $12.80 - $12.80
    $12.80
  • SKU: 154-4196
    $0.75 - $0.75
    $0.75
    $1.00
    $1.00 - $1.00
    $1.00

    HYD CLAMP BOLT 3D M8x45

    $0.75 - $0.75
    $0.75
    $1.00
    $1.00 - $1.00
    $1.00
  • SKU: 154-4192
    $4.35 - $4.35
    $4.35
    $5.80
    $5.80 - $5.80
    $5.80

    HYD CLAMP BOLT STACKING 3D

    $4.35 - $4.35
    $4.35
    $5.80
    $5.80 - $5.80
    $5.80
  • SKU: 154-4167
    $3.63 - $3.63
    $3.63
    $4.84
    $4.84 - $4.84
    $4.84

    HYD CLAMP LID 3D

    $3.63 - $3.63
    $3.63
    $4.84
    $4.84 - $4.84
    $4.84
  • SKU: 154-4193
    $1.82 - $1.82
    $1.82
    $2.43
    $2.43 - $2.43
    $2.43

    HYD CLAMP STACKING PLATE 3D/2D

    $1.82 - $1.82
    $1.82
    $2.43
    $2.43 - $2.43
    $2.43
  • SKU: 154-0016
    $25.50 - $25.50
    $25.50
    $34.01
    $34.01 - $34.01
    $34.01

    HYD FITTING ADAPTOR, 3/4" UNO x 3/4" UNO

    Used on hydraulic cylinder 153-4208 Alternate part no. 153-4304

    $25.50 - $25.50
    $25.50
    $34.01
    $34.01 - $34.01
    $34.01
  • SKU: 154-0019
    $7.20 - $7.20
    $7.20
    $9.60
    $9.60 - $9.60
    $9.60

    Hyd Fitting Adaptor, JIC 3/4", UNO 3/4", G-N-1212

    3/4" JIC MALE, 3/4" UN O RING MALE

    $7.20 - $7.20
    $7.20
    $9.60
    $9.60 - $9.60
    $9.60
  • SKU: 154-4086
    $212.94 - $212.94
    $212.94
    $283.92
    $283.92 - $283.92
    $283.92

    HYD FLUID PORT ADAPTOR 2", 3/4"

    HYDRAULIC FLUID PORT REDUCING BUSHES 2" TO 3/4" BSPPF

    $212.94 - $212.94
    $212.94
    $283.92
    $283.92 - $283.92
    $283.92
  • SKU: 154-4260
    $25.20 - $25.20
    $25.20
    $33.60
    $33.60 - $33.60
    $33.60

    Hyd Orifice Restrictor Plate, Valved Flow Restrictor (#1, #8)

    Used in the #8 and #1 Hydraulic Assemblies. Fits in the port of cylinder 153-4200.

    $25.20 - $25.20
    $25.20
    $33.60
    $33.60 - $33.60
    $33.60
  • SKU: 154-4261
    $13.51 - $13.51
    $13.51
    $18.01
    $18.01 - $18.01
    $18.01

    Hyd Orifice Restrictor Plate, Valved Flow Restrictor (#9)

    Used in the #9 Assemblies.

    $13.51 - $13.51
    $13.51
    $18.01
    $18.01 - $18.01
    $18.01
  • SKU: 140-4029
    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92

    HYD RECOIL PIVOT PIN

    1.1/4" diameter pin, 5" working width. Pin suits the #8 shank and #1 shank hydraulic recoil assemblies. See 120-0001, 120-0003, 120-0007, 005-10...

    View full details
    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92
  • SKU: 153-4217
    $1,282.50 - $1,282.50
    $1,282.50
    $1,710.00
    $1,710.00 - $1,710.00
    $1,710.00

    Hydraulic Cylinder 3" Bore

    Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...

    View full details
    $1,282.50 - $1,282.50
    $1,282.50
    $1,710.00
    $1,710.00 - $1,710.00
    $1,710.00
  • SKU: 153-4200
    $857.25 - $857.25
    $857.25
    $1,143.00
    $1,143.00 - $1,143.00
    $1,143.00

    Hydraulic Jump Cylinder 2.1/2" Bore

    Hydraulic jump cylinder for the Agrowplow #1 and 8 hydraulic shank assemblies. Has a 2.1/2" bore and a 9" rod displacement. 

    $857.25 - $857.25
    $857.25
    $1,143.00
    $1,143.00 - $1,143.00
    $1,143.00
  • SKU: 153-4202
    $444.64 - $444.64
    $444.64
    $592.85
    $592.85 - $592.85
    $592.85

    Hydraulic Jump Cylinder 3" Bore

    Suits #9 hyd shank

    $444.64 - $444.64
    $444.64
    $592.85
    $592.85 - $592.85
    $592.85
  • SKU: 153-0001
    $78.20 - $78.20
    $78.20
    $104.26
    $104.26 - $104.26
    $104.26

    Hydraulic Stroke Control Segments 1.1/8"-1.1/2" Rod

    Hydraulic stroke control segments stop the hydraulic cylinder from closing by increments. On a phasing set, only the drive cylinder needs to be con...

    View full details
    $78.20 - $78.20
    $78.20
    $104.26
    $104.26 - $104.26
    $104.26
  • SKU: 118-4353
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69

    IDLE SHAFT VR654, AD300

    This idle shaft is made out of 25.4mm (1") Stainless steel and is 315mm long. It has a key-way machined in the entire length of the shaft for secur...

    View full details
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69
  • SKU: 113-4047
    $113.40 - $113.40
    $113.40
    $151.20
    $151.20 - $151.20
    $151.20

    IDLER SHAFT 1" AD95/JPC

    $113.40 - $113.40
    $113.40
    $151.20
    $151.20 - $151.20
    $151.20
  • SKU: 116-4003
    $184.69 - $184.69
    $184.69
    $246.25
    $246.25 - $246.25
    $246.25

    IDLER SHAFT 20mm

    $184.69 - $184.69
    $184.69
    $246.25
    $246.25 - $246.25
    $246.25
  • SKU: 023-4005
    Multiple SKU variants are available for this product
    $112.50 - $112.50
    $112.50
    $150.00
    $150.00 - $150.00
    $150.00

    Inclusion Plate Wear Plates

    Wear plates protect inclusion plates from damage through repeated use, increasing their lifespan. Wear plates are sold individually; two plates ar...

    View full details
    $112.50 - $112.50
    $112.50
    $150.00
    $150.00 - $150.00
    $150.00
  • SKU: 023-2001
    Multiple SKU variants are available for this product
    $297.75 - $297.75
    $269.25
    $359.00
    $397.00 - $397.00
    $359.00

    Inclusion Plates

    Inclusion plate with wear plates. Wear plates can be easily replaced saving huge cost in material and time. Designed for the #9 shank and may suit ...

    View full details
    $297.75 - $297.75
    $269.25
    $359.00
    $397.00 - $397.00
    $359.00
  • SKU: 024-4009
    Multiple SKU variants are available for this product
    $82.61 - $82.61
    $82.61
    $110.15
    $110.15 - $110.15
    $110.15

    Inversion Splitter Plate

    Splitter plates for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward th...

    View full details
    $82.61 - $82.61
    $82.61
    $110.15
    $110.15 - $110.15
    $110.15
  • SKU: 134-4055
    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00

    LEVELLING NUT 2"-7 UNF LH THREAD (134-0040)

    Hollow Bar 75 / 45

    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00
  • SKU: 134-4060
    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00

    LEVELLING NUT 2"-7 UNF RH THREAD (134-0041)

    Bush to suit Agrowdrill Levelling Tube

    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00
  • SKU: 124-3007
    $1,064.00 - $1,064.00
    $1,064.00
    $1,064.00 - $1,064.00
    $1,064.00

    LEVELLING TUBE

    $1,064.00 - $1,064.00
    $1,064.00
    $1,064.00 - $1,064.00
    $1,064.00
  • SKU: 116-4015
    $0.00 - $0.00
    $0.00
    $9.09
    $9.09 - $9.09
    $9.09

    LOCK COLLAR 20mm

    Alt. Part SKU 116-415

    $0.00 - $0.00
    $0.00
    $9.09
    $9.09 - $9.09
    $9.09
  • SKU: 140-0039
    $1.50 - $1.50
    $1.50
    $2.00
    $2.00 - $2.00
    $2.00

    Lynch Pin 11mm 32mm

    This lynch pin has an 11mm pin and is designed to fit into clevis pins. Alternate Part No.140-039

    $1.50 - $1.50
    $1.50
    $2.00
    $2.00 - $2.00
    $2.00
  • SKU: 140-0041
    $1.65 - $1.65
    $1.65
    $2.20
    $2.20 - $2.20
    $2.20

    Lynch Pin 11mm 42mm B2700

    11mm pin which secures a shaft of up to 42mm diameter. Old Part Number 140-041

    $1.65 - $1.65
    $1.65
    $2.20
    $2.20 - $2.20
    $2.20
}