Agrowplow

Punch specifically designed to secure the 12mm roll pin 140-4087 and 4077 into the #9 Blade. This punch is made out of 4140 steel and has been har...

Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

Hydraulic hose kit for the AP31 rear tow hitch. Requires 560-2011 or 560-2010. Comes with 3/8" hose, 3/4" JIC female ends (T204-0612), and mounting...

The rear tow hitch attaches to 200x200 RHS frames and is suitable for Agrowplow deep ripper models AP71, AP81, and AP91. It allows for a trailing i...

Hydraulic lines for AP71 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers with hydrau...

Hydraulic lines for AP81 and AP91 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers wi...

Suits the #8 and #1 Hydraulic Shank Assembly

Pin fits in a 12mm hole and is 55mm long.

This rollpin measures at 11.11mm in diameter, is 57.15mm long and is used in the #9 hydraulic assembly on the Dogbone pin and on the Hydraulic Pivo...

These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217

Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank suited to the #8 Hydraulic Shank assembly.The 30" shank has a 550mm maximum working depth. A 24" shank which has a 450mm maximum working dept...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 150 x 150mm RHS frames. *Old Part No. 005-108

Shank Carrier for the #8 Rigid Shank Assembly 150x150 and 178x178. *Old Part No. 020-204

This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402  

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Inversion shank assembly mounted in #9 rigid shank carrier with shear pin recoil, suits 200x200 RHS. It is available in 450mm or 600mm shank length...

Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

This rigid carrier for the #9 shank shearpin assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x200 RHS...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 15...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200x200 RHS clamp plate can b...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 150x150 RHS clamp plate can ...

This hydraulic carrier for the #9v2 shank hydraulic assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x...

This hydraulic swing arm is part of the current #9 shank recoil assembly and supersedes the swing arm without spherical bearings. It comes in a bla...

20" Shank suited to the Econo Style Shank Assembly. Shank has a 350mm maximum working depth, Old castings may have "AT230" *Old Part No. 121-201

#1 hydraulic recoil shank assembly. Can be upgraded to take #8 shank wear parts using the #8 Weld-On Base (121-2005).  Image includes the shank wit...

The #1 Rigid Shank Assembly has a 100x100mm RHS mounting and a maximum working depth of up to 475mm (24" Shank). This pre-1982 assembly has been de...

The #1 Rigid Shank Assembly has a 100x100mm RHS mounting and a maximum working depth of up to 475mm (24" Shank). This pre-1988 assembly has been de...

The #7 Spring Jump Shank Assembly mounts to 100 x 100mm RHS. It offers a 400mm maximum working depth and a shank breakout force of 350kg (772lbs).T...