Skip to content
ABOUT AGROWPLOW CONTACT US

Agrowplow

Filters

  • SKU: 006-4038
    $84.07 - $84.07
    $84.07
    $112.09
    $112.09 - $112.09
    $112.09

    PUNCH to suit 7/16" ROLL PIN & #9 PINS

    Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

    View full details
    $84.07 - $84.07
    $84.07
    $112.09
    $112.09 - $112.09
    $112.09
  • SKU: 560-2012
    $769.89 - $769.89
    $769.89
    $987.00
    $987.00 - $987.00
    $987.00

    Rear Tow Hitch AP31 Hydraulic Kit

    Hydraulic hose kit for the AP31 rear tow hitch. Requires 560-2011 or 560-2010. Comes with 3/8" hose, 3/4" JIC female ends (T204-0612), and mounting...

    View full details
    $769.89 - $769.89
    $769.89
    $987.00
    $987.00 - $987.00
    $987.00
  • SKU: 562-2012
    $2,558.40 - $2,558.40
    $2,558.40
    $3,280.00
    $3,280.00 - $3,280.00
    $3,280.00

    Rear Tow Hitch AP71 AP81 AP91 Hydraulic Bridge

    The rear tow hitch attaches to 200x200 RHS frames and is suitable for Agrowplow deep ripper models AP71, AP81, and AP91. It allows for a trailing i...

    View full details
    $2,558.40 - $2,558.40
    $2,558.40
    $3,280.00
    $3,280.00 - $3,280.00
    $3,280.00
  • SKU: 562-2013
    $964.00 - $964.00
    $964.00
    $1,236.00
    $1,236.00 - $1,236.00
    $1,236.00

    Rear Tow Hitch AP71 Hydraulic Kit

    Hydraulic lines for AP71 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers with hydrau...

    View full details
    $964.00 - $964.00
    $964.00
    $1,236.00
    $1,236.00 - $1,236.00
    $1,236.00
  • SKU: 599-2014
    $1,045.20 - $1,045.20
    $1,045.20
    $1,340.00
    $1,340.00 - $1,340.00
    $1,340.00

    Rear Tow Hitch AP81 AP91 Hydraulic Kit

    Hydraulic lines for AP81 and AP91 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers wi...

    View full details
    $1,045.20 - $1,045.20
    $1,045.20
    $1,340.00
    $1,340.00 - $1,340.00
    $1,340.00
  • SKU: 005-3002
    $30.22 - $30.22
    $30.22
    $40.30
    $40.30 - $40.30
    $40.30

    Recoil Bush

    Suits the #8 and #1 Hydraulic Shank Assembly

    $30.22 - $30.22
    $30.22
    $40.30
    $40.30 - $40.30
    $40.30
  • SKU: 111-3013
    $34.06 - $34.06
    $34.06
    $45.41
    $45.41 - $45.41
    $45.41

    Repair Rib Weld On

    $34.06 - $34.06
    $34.06
    $45.41
    $45.41 - $45.41
    $45.41
  • SKU: 140-4087
    $3.11 - $3.11
    $3.11
    $4.14
    $4.14 - $4.14
    $4.14

    ROLL PIN 12mm x 55 mm

    Pin fits in a 12mm hole and is 55mm long.

    $3.11 - $3.11
    $3.11
    $4.14
    $4.14 - $4.14
    $4.14
  • SKU: 140-1015
    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90

    Roll Pin 7/16" x 2 1/4"

    This rollpin measures at 11.11mm in diameter, is 57.15mm long and is used in the #9 hydraulic assembly on the Dogbone pin and on the Hydraulic Pivo...

    View full details
    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90
  • SKU: 133-5010
    $0.75 - $0.75
    $0.75
    $1.00
    $1.00 - $1.00
    $1.00

    SCREW SELF/T PAN POSI

    $0.75 - $0.75
    $0.75
    $1.00
    $1.00 - $1.00
    $1.00
  • SKU: 133-1099
    $18.65 - $18.65
    $18.65
    $18.65 - $18.65
    $18.65

    SCREW SET 5/8" x 5" UNC G8 Zinc

    $18.65 - $18.65
    $18.65
    $18.65 - $18.65
    $18.65
  • SKU: 154-3046
    $350.60 - $350.60
    $350.60
    $350.60 - $350.60
    $350.60

    SEAL KIT CR450

    Seal kit suits cylinder 153-0024

    $350.60 - $350.60
    $350.60
    $350.60 - $350.60
    $350.60
  • SKU: 153-4041
    $216.00 - $216.00
    $216.00
    $288.00
    $288.00 - $288.00
    $288.00

    Seal kit to suit 153-4217

    These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217

    $216.00 - $216.00
    $216.00
    $288.00
    $288.00 - $288.00
    $288.00
  • SKU: 154-3043
    $135.19 - $135.19
    $135.19
    $180.25
    $180.25 - $180.25
    $180.25

    Seal Kit to suit OOX-9139 (153-4200) and OOX7726

    Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343

    $135.19 - $135.19
    $135.19
    $180.25
    $180.25 - $180.25
    $180.25
  • SKU: 115-7019
    $2.22 - $2.22
    $2.22
    $2.97
    $2.97 - $2.97
    $2.97

    SET SCREW M8 x 16mm, GRADE 8.8, Zinc

    This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

    View full details
    $2.22 - $2.22
    $2.22
    $2.97
    $2.97 - $2.97
    $2.97
  • SKU: 121-1001
    $285.83 - $285.83
    $285.83
    $381.10
    $381.10 - $381.10
    $381.10

    Shank #1 21"

    Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

    View full details
    $285.83 - $285.83
    $285.83
    $381.10
    $381.10 - $381.10
    $381.10
  • SKU: 121-1001
    $285.83 - $285.83
    $285.83
    $381.10
    $381.10 - $381.10
    $381.10

    Shank #1 21"

    Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

    View full details
    $285.83 - $285.83
    $285.83
    $381.10
    $381.10 - $381.10
    $381.10
  • SKU: 121-1004
    $360.42 - $360.42
    $360.42
    $480.60
    $480.60 - $480.60
    $480.60

    Shank #1 24"

    Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

    View full details
    $360.42 - $360.42
    $360.42
    $480.60
    $480.60 - $480.60
    $480.60
  • SKU: 121-1004
    $360.42 - $360.42
    $360.42
    $480.60
    $480.60 - $480.60
    $480.60

    Shank #1 24"

    Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

    View full details
    $360.42 - $360.42
    $360.42
    $480.60
    $480.60 - $480.60
    $480.60
  • SKU: 121-1005
    $239.48 - $239.48
    $239.48
    $319.30
    $319.30 - $319.30
    $319.30

    Shank #7 20"

    20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

    View full details
    $239.48 - $239.48
    $239.48
    $319.30
    $319.30 - $319.30
    $319.30
  • SKU: 121-1005
    $239.48 - $239.48
    $239.48
    $319.30
    $319.30 - $319.30
    $319.30

    Shank #7 20"

    20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

    View full details
    $239.48 - $239.48
    $239.48
    $319.30
    $319.30 - $319.30
    $319.30
  • SKU: 121-1024
    $337.68 - $337.68
    $337.68
    $450.25
    $450.25 - $450.25
    $450.25

    Shank #8 24"

    Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

    View full details
    $337.68 - $337.68
    $337.68
    $450.25
    $450.25 - $450.25
    $450.25
  • SKU: 121-1024
    $337.68 - $337.68
    $337.68
    $450.25
    $450.25 - $450.25
    $450.25

    Shank #8 24"

    Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

    View full details
    $337.68 - $337.68
    $337.68
    $450.25
    $450.25 - $450.25
    $450.25
  • SKU: 121-1030
    $370.80 - $370.80
    $370.80
    $494.40
    $494.40 - $494.40
    $494.40

    SHANK #8 30"

    Shank suited to the #8 Hydraulic Shank assembly.The 30" shank has a 550mm maximum working depth. A 24" shank which has a 450mm maximum working dept...

    View full details
    $370.80 - $370.80
    $370.80
    $494.40
    $494.40 - $494.40
    $494.40
}