ALL STATES & TERRITORIES
Full-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...
View full detailsFull-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...
View full detailsShinguard to suit the Econo style shanks. Old Part Number: 121-302
Fits the Heavy Duty No8. Spring Jump Assembly 120-005. L660 x W90 x H8
Fits #8 and #1 Hydraulic Assemblies *Old Part No. 107-353
Side plate to suit the Econo Spring Jump Assembly 120-0020 Old Part No. 001-304
Suits the #8 and #1 Hydraulic Shank Assembly
SHANK ASSEMBLY #8 SPRING JUMP SPACER PLATE H.D.S.J. SPACER PLATE (DOGBONE)
Used in the 120-0020 UTILITY SPRING JUMP ASSY also known as the SHANK ASSEMBLY #Econo SPRING JUMP 100x100.
Heavy Duty Coil Spring used as part of the #7 Spring Jump and #8 Spring Jump assembly. Old Part No. 124-013
Clamp plate used as part of the #7 Spring Jump and #8 Spring Jump assembly mountings. Old Part No.003-302107-002
Metal spacer used to space out sprockets by 30mm. Designed to fit onto a 50mm shaft. Alternate Part No.117-411
24 TOOTH SIMPLEX SPROCKET, 5/8" PITCH, 25.4 (1") ID BORE
Tapered Roller Bearing suits AP81 and AP91 wheel assemblies. Used on the 10-stud KHitch hub assembly. There are two bearings utilized per hub.
CROWN NUT, suits AP81 and AP91 machines. CROWN NUT ONLY
Machined hub part to suit 10 stud axle assembly on AP81, AP91 and AP92 machines. This hub is used in conjunction with these parts: 1 x HUB CAP ...
View full detailsSweeps are designed for the #9 shank assembly and can fit to any shank with 22mm 1/2" holes. Sweeps increase the shanks effect on the ground, widen...
View full detailsThis bearing spacer is utilised on the #9 Hydraulic Swing arm and has been designed to fit through a 40mm bearing. There are 2 spacers utilised per...
View full detailsTee-bolt used on the #7, #8 spring jump, and #Econo Shank Assemblies. The tee-bolt runs through the centre of the spring to secure it to the assemb...
View full detailsChain tensioner made in engineering plastic, outer diameter 50mm, 80mm long.
M20 U-Bolt to secure to 150x200 RHS.
U-Clamp mounts the shank assembly onto the RHS frame. Suits the 150x150mm (020-1005) #8 Rigid Shank Assembly. Old Part No: 020-205