Agrowplow

This hub component suits the AGR HUB 1, tapered bearing coulter hub assembly 139-4200. Stud to suit 139-4201, Nut to suit stud 139-2027. The ta...

Toolbox to be attached to a plough, contains spare parts for a plough.

Rear tow hitch for the Agrowplow AP11. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, including the Rubber...

  The rear tow hitch allows trailing implements to be hitched safely to the rear of the ripper and provides the facility for it to be connected vi...

*Old Part No. 138-331

Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrowdrill models.The distance bet...

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

SEALED DEEP GROOVE METRIC BALL BEARINGS

Sealed bearing, fits on a shaft 25mm and into hub or housing of 62mm in diameter. ID 25mm, OD62mm. Cylindrical. *Old Part No. 138-031

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank. This blade comes plain with no wear-reducing en...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It has been hard-faced on all leading edges and ...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It comes with 4 x tungsten tiles across the lead...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...

TEMPORAILIY OUT OF STOCK: NEW STOCK DUE MID JANUARY 2026 Heavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard f...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...

Blade for the #9 Inversion Shank Assembly. The blade is made from bisalloy metal and includes tungsten hardfacing for additional durabiltiy in hars...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...

This blade adaptor comes with accompanying hardware and enables the user to secure a heavy-duty #8 blade onto a #1 Shank. To install, remove the pr...

Blade Adaptor for the #7 Shank. Required in attaching the wider #7 Blades listed below onto the shank.Castings may have "#17" stamped on them. Othe...

Blade adaptor for the #1 Shank. It is required to attach the knock-on #1 blades onto the shank.For customers looking to upgrade their blade to a he...

Tool to safely and easily put knock on plough blades.