Agrowplow

Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...

Shank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly.  Old Part No...

Helper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407

Hinge plate for the #7 spring jump assembly. Old Part No. 001-302

Spring bar for the #7 spring jump assembly. Old Part No. 125-036

Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...

Shinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...

Shinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard.  Old Part Numbers...

#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

Hardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate ...

Shank for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward the surface....

Suits the original #9 Hydraulic Recoil assembly (but not the #9v2). Secures the top of the cylinder with a lynch pin 140-0041 and a hairclip 141-00...

30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).

Shearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP71, AP72, AP81, AP91 and AP92 model rigid shank assembl...

Shearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP51 model or 150x150mm RHS Rigid Shank Assemblies and ha...

Shear pin and clips to suit the Econo Rigid shank assembly. Fits the 4"x4" Econo Rigid Shank carrier 004-3001. *Old Part No. 141-017

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...

Heavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard facing designed to protect and prolong the life of the bla...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...

Blade for the #9 Inversion Shank Assembly. The blade is made from bisalloy metal and includes tungsten hardfacing for additional durabiltiy in hars...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...

This blade adaptor comes with accompanying hardware and enables the user to secure a heavy-duty #8 blade onto a #1 Shank. To install, remove the pr...

Blade Adaptor for the #7 Shank. Required in attaching the wider #7 Blades listed below onto the shank.Castings may have "#17" stamped on them. Othe...

Blade adaptor for the #1 Shank. It is required to attach the knock-on #1 blades onto the shank.For customers looking to upgrade their blade to a he...

Tool to safely and easily put knock on plough blades.

Industrial application Teflon coated steel bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush....

#1 rigid shank pivot clamp

Clamping bracket to suit the #8 shank assemblies. Suits 150x150mm (6x6") RHS frame. Assembled in tandem with 005-1008.

Clamp Plate used as part of the #1 Rigid Shank Assembly (120-0015 and 120-0002) and #8 Hydraulic Shank Assembly (120-0003). The plate clamps the as...