ALL STATES & TERRITORIES
Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...
View full detailsShank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly. Old Part No...
View full detailsHelper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407
Hinge plate for the #7 spring jump assembly. Old Part No. 001-302
Spring bar for the #7 spring jump assembly. Old Part No. 125-036
Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201
#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910
Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102
Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...
View full detailsShinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...
View full detailsShinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...
View full detailsShinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard. Old Part Numbers...
View full details#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910
The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...
View full detailsHardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate ...
View full detailsShank for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward the surface....
View full detailsSuits the original #9 Hydraulic Recoil assembly (but not the #9v2). Secures the top of the cylinder with a lynch pin 140-0041 and a hairclip 141-00...
View full details30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).
Shearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP71, AP72, AP81, AP91 and AP92 model rigid shank assembl...
View full detailsShearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP51 model or 150x150mm RHS Rigid Shank Assemblies and ha...
View full detailsShear pin and clips to suit the Econo Rigid shank assembly. Fits the 4"x4" Econo Rigid Shank carrier 004-3001. *Old Part No. 141-017
The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...
View full detailsBlade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...
View full detailsBlade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...
View full detailsBlade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...
View full detailsHeavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...
View full detailsHeavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...
View full detailsHeavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...
View full detailsHeavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard facing designed to protect and prolong the life of the bla...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...
View full detailsBlade for the #9 Inversion Shank Assembly. The blade is made from bisalloy metal and includes tungsten hardfacing for additional durabiltiy in hars...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...
View full detailsThis blade adaptor comes with accompanying hardware and enables the user to secure a heavy-duty #8 blade onto a #1 Shank. To install, remove the pr...
View full detailsBlade Adaptor for the #7 Shank. Required in attaching the wider #7 Blades listed below onto the shank.Castings may have "#17" stamped on them. Othe...
View full detailsBlade adaptor for the #1 Shank. It is required to attach the knock-on #1 blades onto the shank.For customers looking to upgrade their blade to a he...
View full detailsTool to safely and easily put knock on plough blades.
Industrial application Teflon coated steel bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush....
View full details#1 rigid shank pivot clamp
6x6" shank assembly clamp plate for the #8 hydraulic shank assembly. Includes mounting for a coulter assembly.
Clamping bracket to suit the #8 shank assemblies. Suits 150x150mm (6x6") RHS frame. Assembled in tandem with 005-1008.
Clamp Plate used as part of the #1 Rigid Shank Assembly (120-0015 and 120-0002) and #8 Hydraulic Shank Assembly (120-0003). The plate clamps the as...
View full details