Agrowplow

Control arms used in the #1 and #8 Hydraulic Assemblies *Old Part No. 125-352

Used in both #1 and #8 Hydraulic Shank Assemblies. *Old Part No. 005-304

Built exclusively for the AP102 deep ripper, this heavy-duty hardfaced point is built tough and ready for the rigours of ripping down to 750 mm.

3/4" JIC MALE, 3/4" UN O RING MALE

Used in the #8 and #1 Hydraulic Assemblies. Fits in the port of cylinder 153-4200.

Used in the #9 Assemblies.

Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...

Fabricated part equivalent to 154-0016. Used on hydraulic cylinder 153-4208 in tandem with brass flow restrictor USE 154-0016

Hydraulic jump cylinder for the Agrowplow #1 and 8 hydraulic shank assemblies. Has a 2.1/2" bore and a 9" rod displacement. 

Suits #9 hyd shank

Hydraulic stroke control segments stop the hydraulic cylinder from closing by increments. On a phasing set, only the drive cylinder needs to be con...

Splitter plates for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward th...

Spring jump pivot clamp to suit 100mm or 4" RHS. Suits the #8 spring jump shank models. Also known as a carrier plate. *Old Part No. 003-101

Spring jump pivot clamp to suit 100mm or 4" RHS. Suits the #7 spring jump shank assembly. Also known as a carrier plate. Old Part No. 001-102

Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

Suits the #8 and #1 Hydraulic Shank Assembly

These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217

Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank suited to the #8 Hydraulic Shank assembly.The 30" shank has a 550mm maximum working depth. A 24" shank which has a 450mm maximum working dept...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 150 x 150mm RHS frames. *Old Part No. 005-108

Shank Carrier for the #8 Rigid Shank Assembly 150x150 and 178x178. *Old Part No. 020-204

This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402  

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Inversion shank assembly mounted in #9 rigid shank carrier with shear pin recoil, suits 200x200 RHS. It is available in 450mm or 600mm shank length...

Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

This rigid carrier for the #9 shank shearpin assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x200 RHS...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 15...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200x200 RHS clamp plate can b...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 150x150 RHS clamp plate can ...

This hydraulic carrier for the #9v2 shank hydraulic assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x...

This hydraulic swing arm is part of the current #9 shank recoil assembly and supersedes the swing arm without spherical bearings. It comes in a bla...

20" Shank suited to the Econo Style Shank Assembly. Shank has a 350mm maximum working depth, Old castings may have "AT230" *Old Part No. 121-201