Products

Suits the AD720 tyne layouts. The long stub kit is often placed on the front toolbar, placing a tyne in front of the wheels. See tyne layouts for ...

Suits the AD720 tyne layouts. The long stub kit is often placed on the front toolbar, placing a tyne in front of the wheels. See tyne layouts for ...

Farmscan magnet used as part of the metering system. Suits most Agrowdrill models. Used with the Acre Meter Sensor (114-4063). Magnet Assembly AA-...

Farmscan shaft magnet. *Old Part No. 114-484

This felt seal fits the 401 double disc assembly in the disc mounting, protecting the bearing hub from ingress of dust and grit.

Fertiliser tubes allow for the delivery of fertiliser directly behind the plough shank. They can be fitted to the #9 shank assembly or any shank wi...

Flexiroller cast ring. Inside diameter: 12" = 304.8 mm OD: 410mm Width 63.5 mm Weight: 8.88 kg Made of ductile iron which resists cracking and we...

This legacy furrower assembly fits to the rigid or hydraulic #8 or #9 Shank Assembly. It is designed to generate furrows and hills for raised bed c...

This furrower assembly bolts to the #9 Shank and is designed to generate furrows and hills for raised bed cropping. It is used on the CP62 bedforme...

The furrower blades form part of the ground engaging component from the furrower assembly (123-0003). The blades generate furrows and hills for rai...

The furrower pitch plate fits to the #8 shank and secures the furrower blade (111-1006) with the use of the Tee Bolt (132-0060). Part of the furrow...

The Furrower Tee Bolt secures the Furrower Blades (111-1006) to the Furrower Pitch Plate (111-2005) as part of the Furrower Assembly 123-0003. ...

Gas strut to support the lid of Agrowdrill seed boxes. Suits Agrowdrills with separate seed/fertilizer lids including the AD230. Struts have steel ...

Gas strut used to assist in lifting the seed box lid on Agrowdrill seeders. Suits Agrowdrills with combined seed/fertilizer lids. *Old Part No. 1...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here.The gate hex shaft is ...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here.The gate hex shaft is...

Suits the original Agrowdrill, AD95 seed drills. Associated sticker is 115-4048. Old Part number 115-449

(141-4013) #9

(141-4013) #9

Leg spring for harrows assembly. Compatible with most Agrowdrill and Davimac models. Alternate Part Number7040010704001

Harrow sub assembly. Take the working width of the machine, divide by 0.2m and use that number of assemblies to calculate the material required fo...

Hardfaced inversion point for the AP102 plough. Should be fitted on the HD Shank alongside the inversion shinguard.

Hardfaced inversion shinguard for the AP102 plough's HD Shank. Should be fitted on the HD Shank alongside the inversion point.

Built exclusively for the AP102 deep ripper, this heavy-duty hardfaced point is built tough and ready for the rigours of ripping down to 750 mm.

Hex shaft used in Agrowdrill seed box roller assemblies. Hex shafts are available in either 3.6 or 4.8m lengths and can be cut to size to suit the ...

Swivel hitch tow eye for Agrowdrill AD230 and FLexiroller MK2 HD A-frame trailing hitch assemblies. Has an eye internal diameter of 52mm.

Gate lever arm to suit the AD130 and AD230 machines. Fits to the gate bar. Includes handle.

19mm seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m. Other sizes available:  25.4mm diameter [25.4...

25.4mm seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m. Other sizes available:  19mm diameter [19/2...

31.75mm (1¼") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits single-gate hous...

38mm (1½") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits double-gate housing...

Hose clamp is utilised on the 425 Tyne Assembly to hold the 38mm Barflo hose onto the Seed tube.

Holds 43mm OD hose on FLEXI CHUTES

Clear vinyl tube used on small seed boxes and pasture seeders. 19.5mm ID / 25mm OD. When ordering 1 Unit = 1 Metre *Old Part No. 219-412