Products

Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...

Shank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly.  Old Part No...

Helper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407

Hinge plate for the #7 spring jump assembly. Old Part No. 001-302

Spring bar for the #7 spring jump assembly. Old Part No. 125-036

Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201

Spring jump pivot clamp to suit 100mm or 4" RHS. Suits the #8 spring jump shank models. Also known as a carrier plate. This has a 1" hole *Old Par...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102

82 mm shearpin to suit certain #8 Rigid Shank and #8-9 Hybrid Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the corre...

This 90 mm shearpin is the current standard for #8-9 Hybrid Rigid Shank 100 x 100 mm RHS assemblies fitted to AP11 and AP31 ploughs and provides a ...

92 mm shearpin to suit certain #8 Rigid Shank and #8-9 Hybrid Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the corre...

68 mm shearpin to suit certain #8 Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the correct shearpin reduces downtime...

Shinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...

Shinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...

Shinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard.  Old Part Numbers...

Hardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate...

Suits the original #9 Hydraulic Recoil assembly (but not the #9v2). Secures the top of the cylinder with a lynch pin 140-0041 and a hairclip 141-00...

30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).

This high-breakout #9 shearpin is supplied on request for operators who are consistently breaking the standard #9 shearpin in very hard or abrasive...

This is the standard #9 shearpin supplied and fitted to Agrowplow machines from factory. Designed to protect the frame and shank assembly by sheari...

Shear pin and clips to suit the Econo Rigid shank assembly. Fits the 4"x4" Econo Rigid Shank carrier 004-3001. *Old Part No. 141-017

This accumulator clamp suits both 10L and 20L accumulators. Alternate Part No.154-488  

Toolbox to be attached to a plough, contains spare parts for a plough.

Rear tow hitch for the Agrowplow AP11. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, including the Rubber...

  The rear tow hitch allows trailing implements to be hitched safely to the rear of the ripper and provides the facility for it to be connected vi...

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Sealed bearing, fits on a shaft 25mm and into hub or housing of 62mm in diameter. ID 25mm, OD62mm. Cylindrical. *Old Part No. 138-031

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank. This blade comes plain with no wear-reducing en...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It has been hard-faced on all leading edges and ...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It comes with 4 x tungsten tiles across the lead...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.

Heavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...

Heavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard facing designed to protect and prolong the life of the bla...

This GP blade includes hardfaced Bisalloy wings designed to widen the soil lifting footprint and improve soil shatter. The blade is secured to the ...

This GP blade is the standard blade fitted to new Agrowplow machines from the factory and is considered the general-purpose option for most soil ty...

This general purpose blade is supplied plain without any tungsten hardfacing and is primarily suited to customers who prefer to apply their own cus...

This blade is designed for the most abrasive and rocky soil conditions where additional protection is required. The blade is secured to the shank w...