Products

Alt. Part SKU 116-319

Suits all Agrowdrills with electric clutch *Old Part No. 160-433

This is a roller component in the clutch assembly. It is machined out of 65mm diameter self-lubricated engineering plastic and has an overall lengt...

Alt. Part SKU 116-417

Alt. Part SKU 132-225

25mm coil tyne used as part of the Agrowdrill 325 Coil Tyne assembly on ADx20 series Agrowdrill direct drills. Use point adaptor 115-4009 to fit b...

25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits AD083, AD130/140, AD230/240 Agrowdrills. Made in Australia. Download: Pa...

25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts....

Heavy duty coil tyne used in the 732 Coil Tyne Assembly. The coil has a 32mm diameter and suits the 732 baker boot point.  Made in Australia

This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...

Control arms used in the #1 and #8 Hydraulic Assemblies *Old Part No. 125-352

*Old Part No. 140-432

Support arm that mounts a 12" coulter disc to the coulter shaft. *Old Part No. 125-029

Support arm that mounts a 12" coulter disc to the coulter shaft. *Old Part No. 125-029

Support arm that mounts a 14" coulter disc assembly to the coulter shaft. *Old Part No. 125-099

Support arm that mounts a 14" coulter disc assembly to the coulter shaft. *Old Part No. 125-099

12" Coulter assembly to suit the following spring jump shank assemblies: #7 shank spring jump assembly#econo shank spring jump assembly  Parts supp...

12" (305mm) plain coulter disc for deep tillage plough with an 55mm ID. This disc has 5 x 7/16" holes on a 95mm PCD Coulter discs are the active pa...

12" coulter disc fluted for seed drill. For plain coulter disc, use 030-4050. This disc has a PCD of 95mm.

12" FLUTED AGROWPLOW COULTER FOR SEED DRILL PCD 95mm with 5 Studs DWG 030-4055, ASP-08711  ASP lists this part as 12"

14" (355mm) plain coulter disc with an 55mm ID for deep tillage plough. This disc has 5 x 7/16" bolt holes on a 95mm PCD. Coulter discs are the act...

12" coulter disc assembly for deep tillage plough. Supplied with bearings, bearing housing, 12" coulter disc and hardware.  Coulter discs are the ...

14" coulter disc assembly for deep tillage plough. Supplied with bearings, bearing housing, 14" coulter disc and hardware.  Coulter discs are the a...

Mounting shaft that supports a 12" or 14" swivel plough coulter disc assembly and mounts to the plough clamp plate. *Old Part No. 192-028

*Old Part No. 142-410

Suits double coulter units Spring rate is 260.85N/mm *Old Part No. 132-301

*Old Part No. 395-313

Coulter Spring Keeper used as part of the #7 Spring Jump and #8 Spring Jump assemblies. Old Part No. 003-304

Calibration crank handle. Suits the older-style seed drills. Fits over a 20mm shaft with 3mm key way.

Calibration crank handle. Suits most seed drills including the AD95, AD720, AD120, JPC2000, DF1000. Fits over a 25.4mm shaft with 3mm key way. Old...

Used in both #1 and #8 Hydraulic Shank Assemblies. *Old Part No. 005-304

This plastic restrictor is used on the Davimac Feed Roller. Alternate Part No.800-0012

Varibox LH sticker - used for the 'Seed' gearbox for Varibox 2411001

Varibox LH sticker - used for the 'Fertiliser' gearbox for Varibox 2411001

AD083 decal. Measures 240x46mm. Pale grey die-cut vinyl.

AD120 machine model decal. White on clear.

AD130 decal. Measures 345x55mm. Pale grey die-cut vinyl.

AD130 decal. Measures 345x55mm. Pale grey die-cut vinyl.

AD230 decal. Measures 457x68mm. Pale grey die-cut vinyl.

Decal for Agrowdrill AD320 series seed drill. 

Decal for Agrowdrill AD520 series seed drill.