Products

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...

SEALED DEEP GROOVE METRIC BALL BEARINGS

This spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...

Sealed bearing, fits on a shaft 25mm and into hub or housing of 62mm in diameter. ID 25mm, OD62mm. Cylindrical. *Old Part No. 138-031

Sealed bearing, fits on a shaft 50mm and spherical bearing housing of 90mm diameter. See 138-0052 for housing. Used for trailing Flexirollers up to...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Suits bearing housing, 138-0053

This bearing spacer punch is made from a 60mm Gr4140 shaft and is used to replace/install spherical bearings on the #9 Hydraulic Swingarm. Alternat...

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank. This blade comes plain with no wear-reducing en...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It has been hard-faced on all leading edges and ...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It comes with 4 x tungsten tiles across the lead...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...

Heavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard facing designed to protect and prolong the life of the bla...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...

Blade for the #9 Inversion Shank Assembly. The blade is made from bisalloy metal and includes tungsten hardfacing for additional durabiltiy in hars...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...

This blade adaptor comes with accompanying hardware and enables the user to secure a heavy-duty #8 blade onto a #1 Shank. To install, remove the pr...

Blade Adaptor for the #7 Shank. Required in attaching the wider #7 Blades listed below onto the shank.Castings may have "#17" stamped on them. Othe...

Blade adaptor for the #1 Shank. It is required to attach the knock-on #1 blades onto the shank.For customers looking to upgrade their blade to a he...

Tool to safely and easily put knock on plough blades.

Shoulder Bolt used in #8 /#1 Hydraulic Shank Assemblies

Alt. Part SKU 133-160

Alt. Part SKU 133-070