Products

Part of the 551 heavy duty spring tyne assembly, this nylon sleeve fits into the top of the spring mounting and aligns the rocker plate.

551 tyne assembly spring.

Swivel pin which secures the spring to the swing arm in the 551 heavy duty spring tynes assembly.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

Sprocket assembly comes with bearing insert (138-4020). Fits on 25.4mm shaft. Sprocket transfers from 08B chain to 10B chain. Old Part No. 113-357...

Sprocked that transfers between two 08B chains. Fits a 25.4mm shaft. Comes with bearing 138-4020.  Old Part No. 124-401 Model SKU: 124-4001; Chai...

Transfers 08B chain between 21 and 32 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Part No. 124-499 Mod...

Sprocket assembly to transfer 08B chain between 21 and 46 teeth. Fits on 50mm shaft. Comes standard with bearing inserted (138-4050). *Old Part No....

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

Sprocket assembly to transfer 10B chain between 21 and 36 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Pa...

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sprocket clutch 30/21T with bearing 138-1100.

Supplied with bearing 138-4020. Parts are supplied unassembled. Please factor this into setup estimates.

Simplex sprocket, suits 08B chan with 30 teeth. Sprocket secures to a 50mm shaft with both key way (14mm) and grub screws (M8). This part supersede...

Metal spacer used to space out sprockets by 30mm. Designed to fit onto a 50mm shaft. Alternate Part No.117-411

Sprocket with 30 and 36 teeth that suits the DF1000. Includes bearing 138-4051.

Sprocket with two sets of 36 teeth designed for 10B chain. Includes bearing 138-4052. Parts are supplied unassembled. Please factor this into setu...

Plate sprocket to suit 08B chain with 30 teeth. Suits seed drill clutch assembly. Old Part No. 660-413

Simplex sprocket, suits 08B chain with 14 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits ADx30 series Agrowdrills. Model SKU: 11...

Simplex sprocket, suits 08B chain with 15 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits the JPC2000.

Simplex sprocket, suits 08B chain with 20 teeth. Sprocket secures with grub screws to a 50mm shaft. Model SKU: 630-4111; Chain: 08B; Teeth: 20; Sh...

Simplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 20mm shaft. Old Part No. 115-420 Model SKU: 115-4020; Cha...

Simplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 25.4mm shaft. Old Part No. 113-451 Model SKU: 113-4051; C...

Simplex sprocket, suits 08B chain with 24 teeth. Sprocket secures on a 20mm shaft with grub screws. Model SKU: 630-4110; Chain: 08B; Teeth: 24; Sh...

Simplex sprocket, suits 08B chain with 27 teeth. Sprocket fits to a 20mm shaft and secures with grub screws. Identical to part 630-4119

Simplex sprocket, suits 08B chain with 60 teeth. Sprocket fits to a 20mm shaft and secures with grub screws.

24 Tooth Simplex sprocket to suit a 10B Chain. It has been machined out to suit a 60mm shaft. Predominately used on the AD95. Alternate Part No. 11...

24 TOOTH SIMPLEX SPROCKET, 5/8" PITCH, 25.4 (1") ID BORE

36T PRIMARY DRIVE SPROCKET primarily used on the JPC2000. This sprocket is driven by a 10B chain.

Fabricated fixed idler sprocket. Suits 08B chain with two 21 tooth sprockets. Sprockets secure with grub screws to a 25.4mm shaft.

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

Tapered Roller Bearing suits AP81 and AP91 wheel assemblies. Used on the 10-stud KHitch hub assembly. There are two bearings utilized per hub.

10STUD HUB CAP, suits AP81 and AP91 machines. HUB CAP ONLY. This is used in tandem with an O-ring to seal the 10 Stud K-Hitch hub.

CROWN NUT, suits AP81 and AP91 machines. CROWN NUT ONLY

Machined hub part to suit 10 stud axle assembly on AP81, AP91 and AP92 machines. This hub is used in conjunction with these parts:  1 x HUB CAP    ...

Dust cap or Hub cap to suit the 50 series hub used on the AD130.

6 x 205 PCD HUB and STUB assembly. Suits the AD230 and AP51 Parts supplied unassembled. Please factor this into setup estimates. Alt Part Number...

This dust cap suits the AD230 and AD240 stub axles. It has three mounting holes with a grease nipple in the centre. Also known as a dust cover or a...

6 x 205 PCD HUB and STUB assembly. SUITS THE AD240 Parts are supplied unassembled. Please factor this into setup estimates.

Sweeps are designed for the #9 and #8 shank assemblies and can fit to any shank with 22mm 1/2" holes. Sweeps increase the shanks effect on the grou...

This bearing spacer is utilised on the #9 Hydraulic Swing arm and has been designed to fit through a 40mm bearing. There are 2 spacers utilised per...