Products

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Clutch slide fitted with roll pins, grease nipple and spring. This component fits in the AD230 and AD730 clutch assemblies. This part supersedes 64...

Replacement window to suit the AD130 and AD230

Dual seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 38mm (1½ inch) in diameter. Also available with dual 31.75 mm (1¼ inch) ...

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 150 x 150mm RHS frames. *Old Part No. 005-108

Shank Carrier for the #8 Rigid Shank Assembly 150x150 and 178x178. *Old Part No. 020-204

This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...

This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank, offers the user maximum...

Note: BACKORDER - Delivery from supplier expected mid January 2026. Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 4...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402  

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Inversion shank assembly mounted in #9 rigid shank carrier with shear pin recoil, suits 200x200 RHS. It is available in 450mm or 600mm shank length...

Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...

Note: BACKORDER - Delivery from supplier expected mid January 2026. Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank featu...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

This rigid carrier for the #9 shank shearpin assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x200 RHS...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200...

This top clamping plate with a coulter attachment is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 15...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 150x150 RHS frame. A larger 200x200 RHS clamp plate can b...

This top clamping plate is used to mount #9 rigid carriers and #9 hydraulic carriers to a 200x200 RHS frame. A smaller 150x150 RHS clamp plate can ...

This hydraulic carrier for the #9v2 shank hydraulic assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x...

This hydraulic swing arm is part of the current #9 shank recoil assembly and supersedes the swing arm without spherical bearings. It comes in a bla...

20" Shank suited to the Econo Style Shank Assembly. Shank has a 350mm maximum working depth, Old castings may have "AT230" *Old Part No. 121-201

20" Shank suited to the Econo Style Shank Assembly. Shank has a 350mm maximum working depth, Old castings may have "AT230" *Old Part No. 121-201

#1 hydraulic recoil shank assembly. Can be upgraded to take #8 shank wear parts using the #8 Weld-On Base (121-2005).  Image includes the shank wit...

The #7 Spring Jump Shank Assembly mounts to 100 x 100mm RHS. It offers a 400mm maximum working depth and a shank breakout force of 350kg (772lbs).T...

Complete hydraulic number 8 shank assembly including a 24-inch shank, blade, shinguard, and mounting assembly.  The 100x100mm RHS mounting has a 47...

This #8 Rigid Shank assembly has a 450mm maximum working depth, a breakout force of 1100kg (2425lbs) and suits 100x100 RHS. There are also availabl...

Complete #8 Rigid Shank Assembly, including shank, shinguard, blade, mounting assembly, and hardware required for assembly.  The #8 Rigid Shank has...