Products

Torsion spring suits presswheel assemblies 427-100#.

Presswheel tyre 15", wedge profile, suits 11" rim. See 427-2001 for a full assembly including rims and hardware.

Presswheel tyre and rim assembly to suit the 427-100# Presswheel series. The assembly includes an 82mm diameter wedge-profile tyre and 280mm rim pl...

Punch specifically designed to remove worn bushes and insert the steel-backed teflon bushes into the #9 Shank.

Punch specifically designed to secure the 12mm roll pin 140-4087 and 4077 into the #9 Blade. This punch is made out of 4140 steel and has been hard...

Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

Ratchet ram used to adjust the operating and transport height of a range of Agrowplow products including Agrowdrill seed drills, Agrowdrill coulter...

Hydraulic coupling kit to suit Rear Tow Hitches for the Agrowdrill AD130 and AD140 seed drills (630-2027, 630-2036, and 630-2056). Hydraulic hose k...

Hydraulic hose kit for the AP31 rear tow hitch. Requires 560-2011 or 560-2010. Comes with 3/8" hose, 3/4" JIC female ends (T204-0612), and mounting...

The rear tow hitch attaches to 200x200 RHS frames and is suitable for Agrowplow deep ripper models AP71, AP81, and AP91. It allows for a trailing i...

Hydraulic lines for AP71 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers with hydrau...

Hydraulic lines for AP81 and AP91 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers wi...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Rear tow hitch for the Agrowdrill AD140 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

Suits the #8 and #1 Hydraulic Shank Assembly

Used to reduce 38mm seed tube to suit 31.5mm Barflo hose.

Barflo hose reducer to allow 38mm diameter hose to fit a 31.5mm seed tube.

The retaining ring utilised on the 400 Pasture notched disc assembly. Alternate Part No.110-404

Part of the 551 heavy duty spring tyne assembly, this rocker plate fits into the top of the spring mounting.

Suits the 251 tyne and 401 disc assemblies. Secures the spring stem to the tyne arm or disc arm.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

12mm x 60mm long roll pin used to secure #9 blade to the #9 shank. Alt. Part Number: 140-4087

This rollpin measures at 11.11mm in diameter, is 57.15mm long and is used in the #9 hydraulic assembly on the Dogbone pin and on the Hydraulic Pivo...

Bean rollers are an alternative seed roller assembly. They have deeper ribs to allow it to handle beans and larger seeds. They are typically instal...

This plastic bearing assembly holds the feed roller hex shaft. Includes the bearing insert and the housing. It is fastened to the valley with a Pos...

Repair part for roller assembly single gate housing. Old Part Number 114-495

Suits machines with double gate housings (4 feed rollers per row). This housing is fastened to the hopper with a Stainless Screw Tek. 131-1041 [scr...

This Roller Assembly Gate suits both single and double gate housings Old Part Number: 115-414

Restrictor stop, suits all Agrowplow feed rollers, 2 per feed roller Old Part Number: 115-401

Seed roller, suits both single and double gate housings. Old Part Number115-301

Roller assembly housings for Agrowdrill seed boxes to suit the single-gate system.Suits the Original Agrowdrill and a couple of later models. This ...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here. The roller hex shaft ...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here. The roller hex shaft...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

Alt. Part SKU 133-165

SEAL suits AP81 and AP91 machines hubs and pre-2022 Chaser Bins. Seal suits KHitch hub assemblies

Seal kit suits cylinder 153-0024

These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217

Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343

Second seed tube that enables double-chuting on tyne-based Agrowdrills. SUITS: 552, 425, 325, 732, and 700 tyne models Seed hose with an outside d...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...