Products

Suits 732 tyne

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

Tyre and rim to suit the Agrowdrill AD230, AD240, Flexi-Roller or CP62 Cotton Plough.

5/8" U-Bolt to secure to 4"x4" RHS. Similar to part 130-4025 with longer length arms. Passivated parts may be supplied with zinc plating and ...

5/8" U-Bolt to secure to 4"x4" RHS. Similar to part 130-2010 with shorter length arms. *Old Part No. 130-425

M12 U-bolt which fits to 100x100 RHS. Davimac part.

M12 U-Bolt to secure to 50x50 RHS, galvanised with 62mm hole centres. Used on the AD130, AD230 and AD730 to secure the small seed box down tube b...

This M16 U-Bolt is grade 8.8 and is used to secure to 100x100 RHS. It has 55mm of working thread and an overall length of 152mm from the inside fac...

M20 U-Bolt to secure to 100x100 RHS. Used on the AD230 rear tow hitch. Passivated parts may be supplied with zinc plating and vise versa.

M20 U-Bolt to secure to 100x195 RHS. Passivated parts may be supplied with zinc plating and vise versa.

M20 U-Bolt to secure to 150x200 RHS. Used on AP51, AP52 and AP31 Hydraulic machines

U-Clamp mounts the shank assembly onto the RHS frame. Suits the 150x150mm (020-1005) #8 Rigid Shank Assembly. Old Part No: 020-205

U-Clamp mounts the shank assembly onto the RHS frame. Suits the 178x178mm (020-1000) #8 Rigid Shank Assembly. Old Part No: 020-206

UNI HUB 1, 37mm hub 107.9mm PCD with 5 studs. Includes studs and nuts. Wheel studs M12x1.5 Thread. For the complete Uni-Hub 1 assembly see 161-0001. 

Uni-Hub 1 assembly. Includes hub, cap, washer, nut, and split pin. The Uni-Hub 1 is a 5-stud 37mm hub with 107.9mm PCD.  Parts are supplied unassem...

35mm shaft. Hub, 107.9mm PCD with 5 studs. Supplied with M20 Nylock Nut, Washer ID20/OD45/6mm, Hub cap. Dust cap part number 161-0101

This dust cap fits the 401 disc assembly and covers the end of the bearing hub where it mounts through the disc.

35mm shaft. Hub, 107.9mm PCD with 5 studs. For the full assembly including castle nut and hub cap see part 161-0004. This component is the hub with...

35mm shaft. 95mm PCD with 5 studs Supplied with Hub, Wheel Nuts, Studs Collar and Dust Cap, M20 Castle Nut, Washer, Bearing, Seal Ring and Circli...

Includes Hub, Studs, Nuts, Circlip and Bearing Lug nut 161-0138 Parts are supplied unassembled.

V bolt secures to 100x100 RHS with M16 hardware.

The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...