agrowdrill

Shaft locking pin with 9.5mm diameter shaft, 70mm locking length. This pin is used on the front of the presswheel assemblies 427-100# to lock the ...

Presswheel plate to suit 15" presswheels, 5x108PCD. (x2) plates required to for a wheel rim, see 427-2001 for a full assembly with wedge profile ty...

Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Dual 125mm assemblies are suitable for 125mm row spacings, and dual 150mm assemblie...

Presswheel down tubes to suit dual 125mm rows, 427-1002.

Presswheel down tubes to suit dual 150mm rows, 427-1003.

Fabricated knuckle component. Suits Presswheel assembly 427-100#. Secures the spring, arm assembly and pivots.

Pivot bush, suits presswheel assemblies 427-100#. Required in both the horizontal and vertical pivots inside the knuckle.

Presswheel down tubes to suit 175mm rows and over, 427-1001.

Torsion spring suits presswheel assemblies 427-100#.

Presswheel tyre 15", wedge profile, suits 11" rim. See 427-2001 for a full assembly including rims and hardware.

Presswheel tyre and rim assembly to suit the 427-100# Presswheel series. The assembly includes an 82mm diameter wedge-profile tyre and 280mm rim p...

Hydraulic coupling kit to suit Rear Tow Hitches for the Agrowdrill AD130 and AD140 seed drills (630-2027, 630-2036, and 630-2056). Hydraulic hose k...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Rear tow hitch for the Agrowdrill AD140 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

Used to reduce 38mm seed tube to suit 31.5mm Barflo hose.

Barflo hose reducer to allow 38mm diameter hose to fit a 31.5mm seed tube.

The retaining ring utilised on the 400 Pasture notched disc assembly. Alternate Part No.110-404

Part of the 551 heavy duty spring tyne assembly, this rocker plate fits into the top of the spring mounting.