Skip to content
ABOUT AGROWPLOW CONTACT US

Agrowplow

Filters

  • SKU: 154-4261
    $18.01 - $18.01
    $18.01
    $18.01 - $18.01
    $18.01

    Hyd Orifice Restrictor Plate, Valved Flow Restrictor (#9)

    Used in the #9 Assemblies.

    $18.01 - $18.01
    $18.01
    $18.01 - $18.01
    $18.01
  • SKU: 140-4029
    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92

    HYD RECOIL PIVOT PIN

    1.1/4" diameter pin, 5" working width. Pin suits the #8 shank and #1 shank hydraulic recoil assemblies. See 120-0001, 120-0003, 120-0007, 005-10...

    View full details
    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92
  • SKU: 153-4217
    $1,282.50 - $1,282.50
    $1,282.50
    $1,710.00
    $1,710.00 - $1,710.00
    $1,710.00

    Hydraulic Cylinder 3" Bore

    Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...

    View full details
    $1,282.50 - $1,282.50
    $1,282.50
    $1,710.00
    $1,710.00 - $1,710.00
    $1,710.00
  • SKU: 153-4304
    $48.17 - $48.17
    $48.17
    $48.17 - $48.17
    $48.17

    Hydraulic Fitting Adapter

    Fabricated part equivalent to 154-0016. Used on hydraulic cylinder 153-4208 in tandem with brass flow restrictor USE 154-0016

    $48.17 - $48.17
    $48.17
    $48.17 - $48.17
    $48.17
  • SKU: 153-4200
    $857.25 - $857.25
    $857.25
    $1,143.00
    $1,143.00 - $1,143.00
    $1,143.00

    Hydraulic Jump Cylinder 2.1/2" Bore

    Hydraulic jump cylinder for the Agrowplow #1 and 8 hydraulic shank assemblies. Has a 2.1/2" bore and a 9" rod displacement. 

    $857.25 - $857.25
    $857.25
    $1,143.00
    $1,143.00 - $1,143.00
    $1,143.00
  • SKU: 153-4202
    $444.64 - $444.64
    $444.64
    $592.85
    $592.85 - $592.85
    $592.85

    Hydraulic Jump Cylinder 3" Bore

    Suits #9 hyd shank

    $444.64 - $444.64
    $444.64
    $592.85
    $592.85 - $592.85
    $592.85
  • SKU: 153-0001
    $78.20 - $78.20
    $78.20
    $104.26
    $104.26 - $104.26
    $104.26

    Hydraulic Stroke Control Segments 1.1/8"-1.1/2" Rod

    Hydraulic stroke control segments stop the hydraulic cylinder from closing by increments. On a phasing set, only the drive cylinder needs to be con...

    View full details
    $78.20 - $78.20
    $78.20
    $104.26
    $104.26 - $104.26
    $104.26
  • SKU: 118-4353
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69

    IDLE SHAFT VR654, AD300

    This idle shaft is made out of 25.4mm (1") Stainless steel and is 315mm long. It has a key-way machined in the entire length of the shaft for secur...

    View full details
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69
  • Sold out
    SKU: 113-4047
    $151.20 - $151.20
    $151.20
    $151.20 - $151.20
    $151.20

    IDLER SHAFT 1" AD95/JPC

    $151.20 - $151.20
    $151.20
    $151.20 - $151.20
    $151.20
    Sold out
  • SKU: 116-4003
    $96.08 - $96.08
    $96.08
    $128.10
    $128.10 - $128.10
    $128.10

    IDLER SHAFT 20mm

    $96.08 - $96.08
    $96.08
    $128.10
    $128.10 - $128.10
    $128.10
  • SKU: 023-4005
    $58.50 - $58.50
    $58.50
    $78.00
    $78.00 - $78.00
    $78.00

    Inclusion Plate Wear Plates

    Wear plates protect inclusion plates from damage through repeated use, increasing their lifespan. Wear plates are sold individually; two plates ar...

    View full details
    $58.50 - $58.50
    $58.50
    $78.00
    $78.00 - $78.00
    $78.00
  • SKU: 023-2001
    $278.46 - $278.46
    $248.04
    $318.00
    $357.00 - $357.00
    $318.00

    Inclusion Plates

    Inclusion plate with wear plates. Wear plates can be easily replaced saving huge cost in material and time. Designed for the #9 shank and may suit ...

    View full details
    $278.46 - $278.46
    $248.04
    $318.00
    $357.00 - $357.00
    $318.00
  • SKU: 024-4009
    $82.61 - $82.61
    $82.61
    $110.15
    $110.15 - $110.15
    $110.15

    Inversion Splitter Plate

    Splitter plates for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward th...

    View full details
    $82.61 - $82.61
    $82.61
    $110.15
    $110.15 - $110.15
    $110.15
  • SKU: 134-4055
    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00

    LEVELLING NUT 2"-7 UNF LH THREAD (134-0040)

    Hollow Bar 75 / 45

    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00
  • SKU: 134-4060
    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00

    LEVELLING NUT 2"-7 UNF RH THREAD (134-0041)

    Bush to suit Agrowdrill Levelling Tube

    $161.25 - $161.25
    $161.25
    $215.00
    $215.00 - $215.00
    $215.00
  • SKU: 124-3007
    $1,064.00 - $1,064.00
    $1,064.00
    $1,064.00 - $1,064.00
    $1,064.00

    LEVELLING TUBE

    $1,064.00 - $1,064.00
    $1,064.00
    $1,064.00 - $1,064.00
    $1,064.00
  • SKU: 140-0039
    $1.50 - $1.50
    $1.50
    $2.00
    $2.00 - $2.00
    $2.00

    Lynch Pin 11mm 32mm

    This lynch pin has an 11mm pin and is designed to fit into clevis pins. Alternate Part No.140-039

    $1.50 - $1.50
    $1.50
    $2.00
    $2.00 - $2.00
    $2.00
  • SKU: 140-0041
    $1.65 - $1.65
    $1.65
    $2.20
    $2.20 - $2.20
    $2.20

    Lynch Pin 11mm 42mm B2700

    11mm pin which secures a shaft of up to 42mm diameter. Old Part Number 140-041

    $1.65 - $1.65
    $1.65
    $2.20
    $2.20 - $2.20
    $2.20
  • SKU: 153-1025
    $221.25 - $221.25
    $221.25
    $295.00
    $295.00 - $295.00
    $295.00

    MECHANICAL DEPTH STOP TO SUIT 153-4301 and 153-4302

    Mechanical Depth Stop to suit the cylinders on the AD230, AD240 and the AD140.

    $221.25 - $221.25
    $221.25
    $295.00
    $295.00 - $295.00
    $295.00
  • SKU: 122-2002
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05

    Mulch Blade

    Replacement blade for the Mulch Blade Assembly (123-0001). Mulch blades are used to cut plant roots near the surface. The blades are reversible and...

    View full details
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05
  • SKU: 122-1001
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05

    Mulch Blade Clamp

    Part of the mulch blade assembly 123-0001, this clamp secures to the side of the #8 or #9 Shank Assembly and holds the blade 122-2002. Old part no...

    View full details
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05
  • SKU: 122-1002
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05

    Mulch Blade Clamp

    Part of the mulch blade assembly 123-0001, this clamp secures to the side of the #8 or #9 Shank Assembly and holds the blade 122-2002. Old part no...

    View full details
    $25.54 - $25.54
    $25.54
    $34.05
    $34.05 - $34.05
    $34.05
  • Sold out
    SKU: 123-0001
    $147.00 - $147.00
    $147.00
    $147.00 - $147.00
    $147.00

    Mulch Blade Kit

    The mulch blade assembly mounts two blades to rigid or hydraulic #8 and #9 Shank Assemblies. They strike out from the side to cut plant roots near ...

    View full details
    $147.00 - $147.00
    $147.00
    $147.00 - $147.00
    $147.00
    Sold out
  • SKU: 134-1060
    $21.60 - $21.60
    $21.60
    $28.80
    $28.80 - $28.80
    $28.80

    NUT HALF 7/8" UNC ZINC

    $21.60 - $21.60
    $21.60
    $28.80
    $28.80 - $28.80
    $28.80

Find the part you need:

Speak to Someone

1300 722 491

Knowledgebase

View our support articles

Parts Manuals

Find the part you need

FInd a Dealer

Locate your nearest supplier