Find the part you need:
This clevis pin is 25.4mm in diameter and has an overall useable length of 87mm. Designed to have a lynch pin fitted through to secure the pin from...
View full detailsSpring jump pivot clamp to suit 100mm or 4" RHS. Suits the #8 spring jump shank models. Also known as a carrier plate. *Old Part No. 003-101
Spring jump pivot clamp to suit 100mm or 4" RHS. Suits the #7 spring jump shank assembly. Also known as a carrier plate. Old Part No. 001-102
Coulter assembly to suit ploughs with #9 Shank Assemblies with rigid and hydraulic breakout. Coulters are available with either 12" or 14" plain di...
View full detailsPRESSURE GAUGE FOR ACCUMULATOR
Punch specifically designed to remove worn bushes and insert the steel-backed teflon bushes into the #9 Shank.
Punch specifically designed to secure the 12mm roll pin 140-4087 and 4077 into the #9 Blade. This punch is made out of 4140 steel and has been har...
View full detailsPunch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...
View full detailsHydraulic hose kit for the AP31 rear tow hitch. Requires 560-2011 or 560-2010. Comes with 3/8" hose, 3/4" JIC female ends (T204-0612), and mounting...
View full detailsThe rear tow hitch attaches to 200x200 RHS frames and is suitable for Agrowplow deep ripper models AP71, AP81, and AP91. It allows for a trailing i...
View full detailsHydraulic lines for AP71 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers with hydrau...
View full detailsHydraulic lines for AP81 and AP91 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers wi...
View full detailsSuits the #8 and #1 Hydraulic Shank Assembly
Pin fits in a 12mm hole and is 55mm long.
This rollpin measures at 11.11mm in diameter, is 57.15mm long and is used in the #9 hydraulic assembly on the Dogbone pin and on the Hydraulic Pivo...
View full detailsSeal kit suits cylinder 153-0024
These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217
Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343
This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...
View full detailsShank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...
View full details