This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...
View full details
This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...
View full details
Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...
View full details
Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...
View full details
Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...
View full details
Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...
View full details
20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...
View full details
Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...
View full details
Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...
View full details
Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 150 x 150mm RHS frames. *Old Part No. 005-108
Shank Carrier for the #8 Rigid Shank Assembly 150x150 and 178x178. *Old Part No. 020-204
This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...
View full details
BACKORDER: Stock ETA TBC This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The ...
View full details
BACKORDER: Stock ETA TBC The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank...
View full details
BACKORDER: Stock ETA TBC This 30" shank fits into hydraulic #8 shank and hydraulic #1 shank assemblies and enables the user to utilise current #9 b...
View full details
BACKORDER: Stock ETA TBC The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank...
View full details
Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...
View full details
Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...
View full details
This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402
Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...
View full details
Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...
View full details
Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...
View full details
Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...
View full details
Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...
View full details
