Products

Coulter assembly to suit ploughs with #9 Shank Assemblies with rigid and hydraulic breakout. Coulters are available with either 12" or 14" plain di...

PRESSURE GAUGE FOR ACCUMULATOR

Presswheel plate to suit 15" presswheels, 5x108PCD. (x2) plates required to for a wheel rim, see 427-2001 for a full assembly with wedge profile ty...

This is a full parts kit for our 125mm dual-wheel presswheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets...

This is a full parts kit for our 150mm dual-wheel presswheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets...

This is a full parts kit for our single-wheel press wheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets. C...

Presswheel down tubes to suit dual 125mm rows, 427-1002.

Presswheel down tubes to suit dual 150mm rows, 427-1003.

Fabricated knuckle component. Suits Presswheel assembly 427-100#. Secures the spring, arm assembly and pivots.

Pivot bush, suits presswheel assemblies 427-100#. Required in both the horizontal and vertical pivots inside the knuckle.

Presswheel down tubes to suit 175mm rows and over, 427-1001.

Torsion spring suits presswheel assemblies 427-100#.

Presswheel tyre 15", wedge profile, suits 11" rim. See 427-2001 for a full assembly including rims and hardware.

Presswheel tyre and rim assembly to suit the 427-100# Presswheel series. The assembly includes an 82mm diameter wedge-profile tyre and 280mm rim pl...

Punch specifically designed to remove worn bushes and insert the steel-backed teflon bushes into the #9 Shank.

Punch specifically designed to secure the 12mm roll pin 140-4087 and 4077 into the #9 Blade. This punch is made out of 4140 steel and has been hard...

Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

Ratchet ram used to adjust the operating and transport height of a range of Agrowplow products including Agrowdrill seed drills, Agrowdrill coulter...

Hydraulic coupling kit to suit Rear Tow Hitches for the Agrowdrill AD130 and AD140 seed drills (630-2027, 630-2036, and 630-2056). Hydraulic hose k...

Hydraulic hose kit for the AP31 rear tow hitch. Requires 560-2011 or 560-2010. Comes with 3/8" hose, 3/4" JIC female ends (T204-0612), and mounting...

The rear tow hitch attaches to 200x200 RHS frames and is suitable for Agrowplow deep ripper models AP71, AP81, and AP91. It allows for a trailing i...

Hydraulic lines for AP71 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers with hydrau...

Hydraulic lines for AP81 and AP91 rear tow hitch. Requires 562-2012 Rear Tow Hitch AP71 AP81 AP91. Hydraulic lines are required for Flexirollers wi...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Rear tow hitch for the Agrowdrill AD140 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

Suits the #8 and #1 Hydraulic Shank Assembly

Used to reduce 38mm seed tube to suit 31.5mm Barflo hose.

Barflo hose reducer to allow 38mm diameter hose to fit a 31.5mm seed tube.

The retaining ring utilised on the 400 Pasture notched disc assembly. Alternate Part No.110-404

Part of the 551 heavy duty spring tyne assembly, this rocker plate fits into the top of the spring mounting.

Suits the 251 tyne and 401 disc assemblies. Secures the spring stem to the tyne arm or disc arm.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

12mm x 60mm long roll pin used to secure #9 blade to the #9 shank. Alt. Part Number: 140-4087