Products

Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...

Shank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly.  Old Part No...

Helper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407

Hinge plate for the #7 spring jump assembly. Old Part No. 001-302

Spring bar for the #7 spring jump assembly. Old Part No. 125-036

Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201

Spring jump pivot clamp to suit 100mm or 4" RHS. Suits the #8 spring jump shank models. Also known as a carrier plate. This has a 1" hole *Old Par...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102

82 mm shearpin to suit certain #8 Rigid Shank and #8-9 Hybrid Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the corre...

This 90 mm shearpin is the current standard for #8-9 Hybrid Rigid Shank 100 x 100 mm RHS assemblies fitted to AP11 and AP31 ploughs and provides a ...

92 mm shearpin to suit certain #8 Rigid Shank and #8-9 Hybrid Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the corre...

68 mm shearpin to suit certain #8 Rigid Shank assemblies with 1,089 kg breakout force at the blade. Selecting the correct shearpin reduces downtime...

Shinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...

Shinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...

Shinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard.  Old Part Numbers...

Hardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate...

Suits the original #9 Hydraulic Recoil assembly (but not the #9v2). Secures the top of the cylinder with a lynch pin 140-0041 and a hairclip 141-00...

30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).

This high-breakout #9 shearpin is supplied on request for operators who are consistently breaking the standard #9 shearpin in very hard or abrasive...

This is the standard #9 shearpin supplied and fitted to Agrowplow machines from factory. Designed to protect the frame and shank assembly by sheari...

Shear pin and clips to suit the Econo Rigid shank assembly. Fits the 4"x4" Econo Rigid Shank carrier 004-3001. *Old Part No. 141-017

Send drawing 680-4142-A

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

This accumulator clamp suits both 10L and 20L accumulators. Alternate Part No.154-488  

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 15-notch 15" Assembly: 110-3031. ...

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 11-notch 15" Assembly: 110-3030. Pa...

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

RHS mounting plate clamping bracket.

RHS mounting carrier for 251 spring tyne and 401 disc assembly.

Fits the 401 disc and 251 tyne, this component centralized the bottom of the spring on the spring stem.

Engineering plastic locator for the spring of the 251 spring tyne assembly and 401 disc assembly.

Part of the 401 disc and 251 tyne assemblies, this component fits on the spring stem and secures the end of the spring.

This retaining washer fits the top of the spring stem in the 401 disc and 251 tyne assemblies.