Products

This clutch chain guide is 40mm long, made out of 50mm OD nylon and has a 9mm hole drilled through the centre. Alternate Part No.385-480

Chain Tensioner Block made out of 50mm engineering plastic and tapped with a M10 hole

This chain tensioner is made out of a 30mm nylon shaft and is 32mm long.

Mild steel welded part. Chain tensioner used in seed drill drive assemblies to secure the nylon chain tensioner in position.

Old Part 110-3047

Suits all Agrowdrills with electric clutch *Old Part No. 160-433

This is a roller component in the clutch assembly. It is machined out of 65mm diameter self-lubricated engineering plastic and has an overall lengt...

25mm coil tyne used as part of the Agrowdrill 325 Coil Tyne assembly on ADx20 series Agrowdrill direct drills. Use point adaptor 115-4009 to fit b...

25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits AD083, AD130/140, AD230/240 Agrowdrills. Made in Australia. Download: Pa...

25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts....

Heavy duty coil tyne used in the 732 Coil Tyne Assembly. The coil has a 32mm diameter and suits the 732 baker boot point.  Made in Australia

This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...

12" coulter disc fluted for seed drill. For plain coulter disc, use 030-4050. This disc has a PCD of 95mm.

12" FLUTED AGROWPLOW COULTER FOR SEED DRILL PCD 95mm with 5 Studs DWG 030-4055, ASP-08711  ASP lists this part as 12"

Mounting shaft that supports a 12" or 14" swivel plough coulter disc assembly and mounts to the plough clamp plate. *Old Part No. 192-028

*Old Part No. 142-410

Suits double coulter units Spring rate is 260.85N/mm *Old Part No. 132-301

*Old Part No. 395-313

Coulter Spring Keeper used as part of the #7 Spring Jump and #8 Spring Jump assemblies. Old Part No. 003-304

Calibration crank handle. Suits the older-style seed drills. Fits over a 20mm shaft with 3mm key way.

Calibration crank handle. Suits most seed drills including the AD95, AD720, AD120, JPC2000, DF1000. Fits over a 25.4mm shaft with 3mm key way. Old...

AD083 decal. Measures 240x46mm. Pale grey die-cut vinyl.