Products

Suits small seed box.

Suits small seed box.

Suits a small seed box fitted to a seed drill. Designed to have a stainless 1/2" hex shaft go through the sprocket. If the SSB is stand-alone or fr...

Suits a stand alone small seed box or one fitted to a pasture seeder. Designed to have a stainless 1/2" hex shaft go through the sprocket. If the S...

Small seed roller assembly that suits the Agrowdrill and Davimac small seeds box.

Holds 43mm OD hose on Flexi-Chute hoses. 0108010

This spacer ring has an ID of 60mm and is primarily used on Drive & Wheel arm assemblies.

Swing arm which secures the tyne in the 551 heavy-duty shank assembly.

The 551 tyne spring guide secures inside the spring between the carrier and the arm.

Part of the 551 heavy duty spring tyne assembly, this nylon sleeve fits into the top of the spring mounting and aligns the rocker plate.

551 tyne assembly spring.

Swivel pin which secures the spring to the swing arm in the 551 heavy duty spring tynes assembly.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

Sprocket assembly comes with bearing insert (138-4020). Fits on 25.4mm shaft. Sprocket transfers from 08B chain to 10B chain. Old Part No. 113-357...

Sprocked that transfers between two 08B chains. Fits a 25.4mm shaft. Comes with bearing 138-4020.  Old Part No. 124-401 Model SKU: 124-4001; Chai...

Transfers 08B chain between 21 and 32 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Part No. 124-499 Mod...

Sprocket assembly to transfer 08B chain between 21 and 46 teeth. Fits on 50mm shaft. Comes standard with bearing inserted (138-4050). *Old Part No....

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

Sprocket assembly to transfer 10B chain between 21 and 36 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Pa...

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sprocket clutch 30/21T with bearing 138-1100.

Supplied with bearing 138-4020. Parts are supplied unassembled. Please factor this into setup estimates.

Simplex sprocket, suits 08B chan with 30 teeth. Sprocket secures to a 50mm shaft with both key way (14mm) and grub screws (M8). This part supersede...