Agrowdrill Drive Components

Simplex sprocket, suits 08B chain with 27 teeth. Sprocket fits to a 20mm shaft and secures with grub screws. Identical to part 630-4119

Simplex sprocket, suits 08B chain with 20 teeth. Sprocket secures with grub screws to a 50mm shaft. Model SKU: 630-4111; Chain: 08B; Teeth: 20; Sh...

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

Nylon chain tensioner cut from 70mm rod. Used on seed drill assemblies including the 13 and 18 run Agrowpdrills and the 3000 and 3400 seed drill mo...

25.4mm locking collar used in the seed drill drive assembly.

Suits all Agrowdrills with electric clutch *Old Part No. 160-433

Lever and pull assembly mounting shaft that forms part of the AD230 clutch assembly.

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in see...

Clutch drive component for the AD230 and AD730 machines. Comes zinc-plated to reduce wear and increase the overall longevity of the drive.

Includes Hub, Studs, Nuts, Circlip and Bearing Lug nut 161-0138 Parts are supplied unassembled.

Plate sprocket to suit 08B chain with 30 teeth. Suits seed drill clutch assembly. Old Part No. 660-413

Bearing Housing, suits bearing 138-1033.

Suits bearing housing, 138-0053

Sprocket with two sets of 36 teeth designed for 10B chain. Includes bearing 138-4052. Parts are supplied unassembled. Please factor this into setu...

Farmscan magnet used as part of the metering system. Suits most Agrowdrill models. Used with the Acre Meter Sensor (114-4063). Magnet Assembly AA-...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

This chain tensioner is made out of a 30mm nylon shaft and is 32mm long.

Chain Tensioner used on the JPC 2000. It is 90mm long

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

24 Tooth Simplex sprocket to suit a 10B Chain. It has been machined out to suit a 60mm shaft. Predominately used on the AD95. Requires 2x #115-7013...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

36T PRIMARY DRIVE SPROCKET primarily used on the JPC2000. This sprocket is driven by a 10B chain.

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Clutch slide fitted with roll pins, grease nipple and spring. This component fits in the AD230 and AD730 clutch assemblies. This part supersedes 64...