Skip to content
ABOUT AGROWPLOW CONTACT US

Agrowdrill

Filters

  • SKU: 134-4009
    $0.49 - $0.49
    $0.49
    $0.65
    $0.65 - $0.65
    $0.65

    NUTSERT HEX 6MM, 9.5mm HEX, LARGE FLANGE

    $0.49 - $0.49
    $0.49
    $0.65
    $0.65 - $0.65
    $0.65
  • SKU: 140-0001
    $43.82 - $43.82
    $43.82
    $58.43
    $58.43 - $58.43
    $58.43

    Pin Clevis 7/8" 105mm B215

    $43.82 - $43.82
    $43.82
    $58.43
    $58.43 - $58.43
    $58.43
  • SKU: 140-4112
    $3.90 - $3.90
    $3.90
    $5.21
    $5.21 - $5.21
    $5.21

    PIN SHAFT LOCK 9.5mm x 70mm

    Shaft locking pin with 9.5mm diameter shaft, 70mm locking length. This pin is used on the front of the presswheel assemblies 427-100# to lock the ...

    View full details
    $3.90 - $3.90
    $3.90
    $5.21
    $5.21 - $5.21
    $5.21
  • SKU: 110-4003
    $26.48 - $26.48
    $26.48
    $35.31
    $35.31 - $35.31
    $35.31

    Plated Cover AP-299041

    $26.48 - $26.48
    $26.48
    $35.31
    $35.31 - $35.31
    $35.31
  • SKU: 427-4002
    $41.25 - $41.25
    $41.25
    $55.00
    $55.00 - $55.00
    $55.00

    PRESSWHEEL 11" RIM PLATE, 5x108PCD, 280 OD, 73mm inner hole. SEND DRAWING 427-4002 RevB WITH PO

    Presswheel plate to suit 15" presswheels, 5x108PCD. (x2) plates required to for a wheel rim, see 427-2001 for a full assembly with wedge profile ty...

    View full details
    $41.25 - $41.25
    $41.25
    $55.00
    $55.00 - $55.00
    $55.00
  • SKU: 427-1102
    $1,364.17 - $1,364.17
    $1,364.17
    $1,818.90
    $1,818.90 - $1,818.90
    $1,818.90

    Presswheel AGR-HUB 2 Dual 125mm Spacing Wedge

    Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

    View full details
    $1,364.17 - $1,364.17
    $1,364.17
    $1,818.90
    $1,818.90 - $1,818.90
    $1,818.90
  • SKU: 427-1103
    $1,364.17 - $1,364.17
    $1,364.17
    $1,818.90
    $1,818.90 - $1,818.90
    $1,818.90

    Presswheel AGR-HUB 2 Dual 150mm Spacing Wedge

    Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

    View full details
    $1,364.17 - $1,364.17
    $1,364.17
    $1,818.90
    $1,818.90 - $1,818.90
    $1,818.90
  • SKU: 427-1101
    $946.80 - $946.80
    $946.80
    $1,262.40
    $1,262.40 - $1,262.40
    $1,262.40

    Presswheel AGR-HUB 2 Single Wedge

    Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Single presswheel assemblies are suitable for row spacings of 175mm and over. Dual 1...

    View full details
    $946.80 - $946.80
    $946.80
    $1,262.40
    $1,262.40 - $1,262.40
    $1,262.40
  • Dual 125mm Presswheel Single Arm
    Single 175mm Presswheel Single Arm
    SKU: 427-1001
    Multiple SKU variants are available for this product
    $946.80 - $946.80
    $946.80
    $1,262.40
    $1,262.40 - $1,262.40
    $1,262.40

    Presswheel Assembly

    Presswheel arm assembly suitable for mounting to 65x65mm RHS.  Dual 125mm assemblies are suitable for 125mm row spacings, and dual 150mm assemblie...

    View full details
    $946.80 - $946.80
    $946.80
    $1,262.40
    $1,262.40 - $1,262.40
    $1,262.40
  • SKU: 427-2011
    $250.00 - $250.00
    $250.00
    $250.00
    $250.00 - $250.00
    $250.00

    Presswheel Dual 125mm Small Seed Down Tubes

    Presswheel down tubes to suit dual 125mm rows, 427-1002.

    $250.00 - $250.00
    $250.00
    $250.00
    $250.00 - $250.00
    $250.00
  • SKU: 427-2012
    $250.00 - $250.00
    $250.00
    $250.00
    $250.00 - $250.00
    $250.00

    Presswheel Dual 150mm Small Seed Down Tubes

    Presswheel down tubes to suit dual 150mm rows, 427-1003.

    $250.00 - $250.00
    $250.00
    $250.00
    $250.00 - $250.00
    $250.00
  • SKU: 427-3002
    $356.15 - $356.15
    $356.15
    $474.85
    $474.85 - $474.85
    $474.85

    PRESSWHEEL KNUCKLE

    Fabricated knuckle component. Suits Presswheel assembly 427-100#. Secures the spring, arm assembly and pivots.

    $356.15 - $356.15
    $356.15
    $474.85
    $474.85 - $474.85
    $474.85
  • SKU: 427-4006
    $26.13 - $26.13
    $26.13
    $34.85
    $34.85 - $34.85
    $34.85

    PRESSWHEEL PIVOT NYLON

    Pivot bush, suits presswheel assemblies 427-100#. Required in both the horizontal and vertical pivots inside the knuckle.

    $26.13 - $26.13
    $26.13
    $34.85
    $34.85 - $34.85
    $34.85
  • SKU: 427-2010
    $190.00 - $190.00
    $190.00
    $190.00
    $190.00 - $190.00
    $190.00

    Presswheel Single Small Seed Down Tubes

    Presswheel down tubes to suit 175mm rows and over, 427-1001.

    $190.00 - $190.00
    $190.00
    $190.00
    $190.00 - $190.00
    $190.00
  • SKU: 427-4031
    $27.98 - $27.98
    $27.98
    $37.30
    $37.30 - $37.30
    $37.30

    PRESSWHEEL TORSION SPRING

    Torsion spring suits presswheel assemblies 427-100#.

    $27.98 - $27.98
    $27.98
    $37.30
    $37.30 - $37.30
    $37.30
  • SKU: 427-4001
    $89.10 - $89.10
    $89.10
    $118.80
    $118.80 - $118.80
    $118.80

    Presswheel Tyre Wedge 82mm

    Presswheel tyre 15", wedge profile, suits 11" rim. See 427-2001 for a full assembly including rims and hardware.

    $89.10 - $89.10
    $89.10
    $118.80
    $118.80 - $118.80
    $118.80
  • SKU: 427-2001
    $157.50 - $157.50
    $157.50
    $210.00
    $210.00 - $210.00
    $210.00

    Presswheel Wedge Tyre and Rim

    Presswheel tyre and rim assembly to suit the 427-100# Presswheel series. The assembly includes an 82mm diameter wedge-profile tyre and 280mm rim p...

    View full details
    $157.50 - $157.50
    $157.50
    $210.00
    $210.00 - $210.00
    $210.00
  • SKU: 630-2028
    $842.25 - $842.25
    $842.25
    $1,123.00
    $1,123.00 - $1,123.00
    $1,123.00

    Rear Tow Hitch AD130 & AD140 Hydraulic Kit

    Hydraulic coupling kit to suit Rear Tow Hitches for the Agrowdrill AD130 and AD140 seed drills (630-2027, 630-2036, and 630-2056). Hydraulic hose k...

    View full details
    $842.25 - $842.25
    $842.25
    $1,123.00
    $1,123.00 - $1,123.00
    $1,123.00
  • SKU: 643-2068
    $687.75 - $687.75
    $687.75
    $917.00
    $917.00 - $917.00
    $917.00

    Rear Tow Hitch Centre suit AD240

    Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

    View full details
    $687.75 - $687.75
    $687.75
    $917.00
    $917.00 - $917.00
    $917.00
  • SKU: 630-2027
    $687.75 - $687.75
    $687.75
    $917.00
    $917.00 - $917.00
    $917.00

    Rear Tow Hitch Centre suits AD140

    Rear tow hitch for the Agrowdrill AD140 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

    View full details
    $687.75 - $687.75
    $687.75
    $917.00
    $917.00 - $917.00
    $917.00
  • SKU: 054-2003
    $614.25 - $614.25
    $614.25
    $819.00
    $819.00 - $819.00
    $819.00

    Rear Tow Hitch Stem AD083/AP11

    Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

    View full details
    $614.25 - $614.25
    $614.25
    $819.00
    $819.00 - $819.00
    $819.00
  • SKU: 114-3114
    $18.00 - $18.00
    $18.00
    $24.00
    $24.00 - $24.00
    $24.00

    Reducer 35/32

    Used to reduce 38mm seed tube to suit 31.5mm Barflo hose.

    $18.00 - $18.00
    $18.00
    $24.00
    $24.00 - $24.00
    $24.00
  • SKU: 114-4227
    $15.00 - $15.00
    $15.00
    $20.00
    $20.00 - $20.00
    $20.00

    Reducer 38/31.75

    Barflo hose reducer to allow 38mm diameter hose to fit a 31.5mm seed tube.

    $15.00 - $15.00
    $15.00
    $20.00
    $20.00 - $20.00
    $20.00
  • SKU: 110-4004
    $5.30 - $5.30
    $5.30
    $7.07
    $7.07 - $7.07
    $7.07

    Retaining Ring

    The retaining ring utilised on the 400 Pasture notched disc assembly. Alternate Part No.110-404

    $5.30 - $5.30
    $5.30
    $7.07
    $7.07 - $7.07
    $7.07
}