agrowdrill

The clutch pull set are part of the AD230 clutch pull and lever assembly. Comes with a nylon fork to align the clutch pull with the channel in the ...

Clutch update kit for the AD230. Designed to improve clutch longevity and make calibration easier.  The kit includes a redesigned clutch slide with...

This levelling tube assembly is made to order and suits the AD230. Lead times are 1-2 weeks from placement of order.

Rear tow hitch for the Agrowdrill AD230 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD730 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Coulter discs are the active part of a coulter assembly responsible for cutting through trash ahead of the shank assembly on a seed drill. Agrowdr...

An Agrowplow denim baseball trucker cap with a Medium Profile Crown. This cap is coloured Agrowplow blue and has 2 colour bands around the back: g...

This carrier connects the 325 baker boot point to the 325 coil tyne. Requires the following hardware to attach to the tyne. 1 x BOLT 1/2" x 2.1/2"...

Universal heavy-duty cast hardfaced baker boot point with 61.5mm hole centres. Compatible with a wide range of seed drills and coil tyne setups usi...

Extended fabricated hardfaced baker boot point to suit the 325 Coil Tyne assembly. Designed for deeper sowing depths on older Agrowdrills and compa...

Premium fabricated hardfaced baker boot point to suit the 325 Coil Tyne assembly. Also fits various third-party seed drills and coil tynes. An exte...

Premium fabricated hardfaced baker boot point to suit the 425 Coil Tyne assembly. Manufactured in Australia from 6mm Bisalloy plate, this point is ...

Point to suit the 551 HD Tyne Assembly.  Cast metal component with tungsten tiles applied to the front, and sides. Supplied with R-clip. This is th...

Point to suit the 551 HD Tyne Assembly.  Cast metal component with tungsten tiles applied to the front, and sides. Supplied with R-clip. This is th...

Cast point to suit the 552 HD Spring Tyne assembly.  This is the bullet variant. Wing point (411-0094) or knife point (411-0091 - contact us) varie...

Cast point to suit the 552 HD Spring Tyne assembly.  This is the wing variant. Wing-styled points are suitable for a variety of mixed seeding opera...

This point features a tungsten tile on the tip and leading edges with additional hardfacing to provide enhanced wear reduction in harsh environment...

This 732 point features a tungsten tile on the tip and wings with additional hardfacing to provide enhanced wear reduction in harsh environments. S...

Self-Aligning Coulter (SAC) clay opener with baker boot profile and curved front ridge. Suits SAC assemblies Left-hand 115-3005 (115-305) and Right...

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Bearing Housing, suits bearing 138-1033.

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...

This spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Suits bearing housing, 138-0053

*Old Part No. 133-157

*Old Part No. 133-157

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in see...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance free bush. Used in som...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...

Calibration handle to suit the AD230 Seed drill. It comes zinc plated and assembled with plastic piping installed.

Half link to suit chain 08B. Also see joiner link 115-7011. *Old Part No. 115-710

Joiner link to suit chain 08B. Also see half link 115-7010. *Old Part No. 115-711

SKF Carbon steel drive chain. Comes in a 3m length. Half link or joiner links may be required.Some sprocket drive assemblies also utilise an 08B du...

SKF Carbon steel drive chain. Comes in a 3m length.  ANSI Chain Size: 08B-2 Strands: Single Pitch (mm): 12.7 or 1/2" A single 08B chain can be...

Joiner link to suit 10B chain. Alternate Part No.137-160

SKF Carbon steel drive chain. Comes in a 3m length. Joiner links may be required. ANSI Chain Size: 10B-1 Strands: Single Pitch (mm): 15.875 or 5/8"...