Agrowdrill Seed Box Parts

Restrictor stop, suits all Agrowplow feed rollers, 2 per feed roller Old Part Number: 115-401

This Roller Assembly Gate suits both single and double gate housings Old Part Number: 115-414

Small seed roller assembly that suits the Agrowdrill and Davimac small seeds box.

Repair part for roller assembly single gate housing. Old Part Number 114-495

Seed roller, suits both single and double gate housings. Old Part Number115-301

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

This plastic bearing assembly holds the feed roller hex shaft. Includes the bearing insert and the housing. It is fastened to the valley with a Pos...

38mm (1½") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits double-gate housing...

Suits machines with double gate housings (4 feed rollers per row). This housing is fastened to the hopper with a Stainless Screw Tek. 131-1041 [scr...

Gas strut to support the lid of Agrowdrill seed boxes. Suits Agrowdrills with separate seed/fertilizer lids including the AD230. Struts have steel ...

Gas strut used to assist in lifting the seed box lid on Agrowdrill seeders. Suits Agrowdrills with combined seed/fertilizer lids. *Old Part No. 1...

Roller assembly housings for Agrowdrill seed boxes to suit the single-gate system.Suits the Original Agrowdrill and a couple of later models. This ...

31.75mm (1¼") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits single-gate hous...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here.The gate hex shaft is ...

Plastic handle formed over an M10 nut. Used on the varibox adjustment arms and secures small seed box guards. Old Part Number115-714

Special washers made for the seed box on Agrowdrills. Used on the gate arms and varibox adjustment arms.

Calibration handle to suit the AD230 Seed drill. It comes zinc plated and assembled with plastic piping installed.

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Hex shaft used in Agrowdrill seed box roller assemblies. Hex shafts are available in either 3.6 or 4.8m lengths and can be cut to size to suit the ...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

Gate lever arm to suit the AD130 and AD230 machines. Fits to the gate bar. Includes handle.

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here. The roller hex shaft ...

19mm seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m. Other sizes available:  25.4mm diameter [25.4...

25.4mm seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m. Other sizes available:  19mm diameter [1...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here.The gate hex shaft is...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here. The roller hex shaft...

Clear vinyl tube used on small seed boxes and pasture seeders. 19.5mm ID / 25mm OD. When ordering 1 Unit = 1 Metre *Old Part No. 219-412

Suits the original Agrowdrill, AD95 seed drills. Associated sticker is 115-4048. Old Part number 115-449