#9 Hydraulic Shank Components

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

Full-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...

Full-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).

This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402  

Used in the #9 Assemblies.

3/4" JIC MALE, 3/4" UN O RING MALE

This bearing spacer punch is made from a 60mm Gr4140 shaft and is used to replace/install spherical bearings on the #9 Hydraulic Swingarm. Alternat...

Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...

Punch specifically designed to secure the 12mm roll pin 140-4087 and 4077 into the #9 Blade. This punch is made out of 4140 steel and has been hard...

Punch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...

12mm x 60mm long roll pin used to secure #9 blade to the #9 shank. Alt. Part Number: 140-4087

Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...

Hardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate...

This hydraulic carrier for the #9v2 shank hydraulic assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x...

This bearing spacer is utilised on the #9 Hydraulic Swing arm and has been designed to fit through a 40mm bearing. There are 2 spacers utilised per...

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

This hydraulic swing arm is part of the current #9 shank recoil assembly and supersedes the swing arm without spherical bearings. It comes in a bla...

Coulter assembly kit to suit ploughs with #9 Shank Assemblies with hydraulic breakout.  Coulters mount to the shank assembly ahead of the shanks, b...

Used on hydraulic cylinder 153-4208 Alternate part no. 153-4304

Coulter assembly to suit ploughs with #9 Shank Assemblies with rigid and hydraulic breakout. Coulters are available with either 12" or 14" plain di...

This blade is designed for the most abrasive and rocky soil conditions where additional protection is required. The blade is secured to the shank w...

This GP blade is the standard blade fitted to new Agrowplow machines from the factory and is considered the general-purpose option for most soil ty...

This general purpose blade is supplied plain without any tungsten hardfacing and is primarily suited to customers who prefer to apply their own cus...

This GP blade includes hardfaced Bisalloy wings designed to widen the soil lifting footprint and improve soil shatter. The blade is secured to the ...

This #9 Hydraulic Shank Assembly kit includes the #9 shank with blade, shinguard, hydraulic recoil armature, and mounting components to suit either...