Products

Premium fabricated hardfaced baker boot point to suit the 325 Coil Tyne assembly. Also fits various third-party seed drills and coil tynes. An exte...

Premium fabricated hardfaced baker boot point to suit the 425 Coil Tyne assembly. Manufactured in Australia from 6mm Bisalloy plate, this point is ...

Point to suit the 551 HD Tyne Assembly.  Cast metal component with tungsten tiles applied to the front, and sides. Supplied with R-clip. This is th...

Point to suit the 551 HD Tyne Assembly.  Cast metal component with tungsten tiles applied to the front, and sides. Supplied with R-clip. This is th...

Cast point to suit the 552 HD Spring Tyne assembly.  This is the bullet variant. Wing point (411-0094) or knife point (411-0091 - contact us) varie...

Cast point to suit the 552 HD Spring Tyne assembly.  This is the wing variant. Wing-styled points are suitable for a variety of mixed seeding opera...

This point features a tungsten tile on the tip and leading edges with additional hardfacing to provide enhanced wear reduction in harsh environment...

This 732 point features a tungsten tile on the tip and wings with additional hardfacing to provide enhanced wear reduction in harsh environments. S...

Self-Aligning Coulter (SAC) clay opener with baker boot profile and curved front ridge. Suits SAC assemblies Left-hand 115-3005 (115-305) and Right...

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

*Old Part No. 138-331

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Bearing Housing, suits bearing 138-1033.

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrowdrill models.The distance bet...

Fabricated bearing housing for 14" coulter discs. Suits bearings with 62mm outer diameter. *Old Part No. 138-030

Bearing mounting, suits bearing 115-7004. Used on trailing Flexirollers up to 5m working width. *Old Part No. 138-052

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...