Skip to content
LIMITED AD640 LAUNCH SPECIAL: First 5 units only! CHOOSE YOUR DEAL →
LIMITED AD640 LAUNCH SPECIAL: First 5 units only! CHOOSE YOUR DEAL →
ABOUT AGROWPLOW CONTACT US SEED DRILL CALIBRATION

Products

Filters

  • SKU: 130-1000
    $55.68 - $55.68
    $55.68
    $74.25
    $74.25 - $74.25
    $74.25

    U-Bolt M20 100x150 Zinc

    M20 U-Bolt to secure to 100x100 RHS. Used on the AD230 rear tow hitch. Passivated parts may be supplied with zinc plating and vise versa.

    $55.68 - $55.68
    $55.68
    $74.25
    $74.25 - $74.25
    $74.25
  • SKU: 130-4019
    $59.25 - $59.25
    $59.25
    $79.00
    $79.00 - $79.00
    $79.00

    U-bolt M20 103x200 (100x195) Passivated

    M20 U-Bolt to secure to 100x195 RHS. Passivated parts may be supplied with zinc plating and vise versa.

    $59.25 - $59.25
    $59.25
    $79.00
    $79.00 - $79.00
    $79.00
  • SKU: 130-4008
    $40.55 - $40.55
    $40.55
    $54.04
    $54.04 - $54.04
    $54.04

    U-bolt M20 150x200 Zinc

    M20 U-Bolt to secure to 150x200 RHS. Used on AP51, AP52 and AP31 Hydraulic machines

    $40.55 - $40.55
    $40.55
    $54.04
    $54.04 - $54.04
    $54.04
  • SKU: 020-2005
    $119.77 - $119.77
    $119.77
    $159.70
    $159.70 - $159.70
    $159.70

    U-Clamp 6"x6" to suit #8 Rigid Shank Assembly

    U-Clamp mounts the shank assembly onto the RHS frame. Suits the 150x150mm (020-1005) #8 Rigid Shank Assembly. Old Part No: 020-205

    $119.77 - $119.77
    $119.77
    $159.70
    $159.70 - $159.70
    $159.70
  • SKU: 020-2006
    $188.41 - $188.41
    $188.41
    $251.22
    $251.22 - $251.22
    $251.22

    U-Clamp 7x7" to suit #8 Rigid Shank Assembly

    U-Clamp mounts the shank assembly onto the RHS frame. Suits the 178x178mm (020-1000) #8 Rigid Shank Assembly. Old Part No: 020-206

    $188.41 - $188.41
    $188.41
    $251.22
    $251.22 - $251.22
    $251.22
  • SKU: 161-0120
    $85.63 - $85.63
    $85.63
    $114.17
    $114.17 - $114.17
    $114.17

    Uni-Hub 1 37mm Bearing Hub

    UNI HUB 1, 37mm hub 107.9mm PCD with 5 studs. Includes studs and nuts. Wheel studs M12x1.5 Thread. For the complete Uni-Hub 1 assembly see 161-0001. 

    $85.63 - $85.63
    $85.63
    $114.17
    $114.17 - $114.17
    $114.17
  • SKU: 161-0001
    $130.62 - $130.62
    $130.62
    $174.17
    $174.17 - $174.17
    $174.17

    Uni-Hub 1 Assembly

    Uni-Hub 1 assembly. Includes hub, cap, washer, nut, and split pin. The Uni-Hub 1 is a 5-stud 37mm hub with 107.9mm PCD.  Parts are supplied unassem...

    View full details
    $130.62 - $130.62
    $130.62
    $174.17
    $174.17 - $174.17
    $174.17
  • SKU: 161-0004
    $124.95 - $124.95
    $124.95
    $166.60
    $166.60 - $166.60
    $166.60

    Uni-Hub 4 Coulter Hub Assembly (Uses Uni-hub 405)

    35mm shaft. Hub, 107.9mm PCD with 5 studs. Supplied with M20 Nylock Nut, Washer ID20/OD45/6mm, Hub cap. Dust cap part number 161-0101

    $124.95 - $124.95
    $124.95
    $166.60
    $166.60 - $166.60
    $166.60
  • SKU: 161-0101
    $15.30 - $15.30
    $15.30
    $20.40
    $20.40 - $20.40
    $20.40

    UNI-HUB 4, DUST CAP

    $15.30 - $15.30
    $15.30
    $20.40
    $20.40 - $20.40
    $20.40
  • SKU: 408-4034
    $6.81 - $6.81
    $6.81
    $9.08
    $9.08 - $9.08
    $9.08

    UNI-HUB 4, ROCK GUARD

    This dust cap fits the 401 disc assembly and covers the end of the bearing hub where it mounts through the disc.

    $6.81 - $6.81
    $6.81
    $9.08
    $9.08 - $9.08
    $9.08
  • SKU: 161-0100
    $93.75 - $93.75
    $93.75
    $125.00
    $125.00 - $125.00
    $125.00

    Uni-Hub 405, 35mm Bearing Hub, HT Stud Pattern

    35mm shaft. Hub, 107.9mm PCD with 5 studs. For the full assembly including castle nut and hub cap see part 161-0004. This component is the hub with...

    View full details
    $93.75 - $93.75
    $93.75
    $125.00
    $125.00 - $125.00
    $125.00
  • SKU: 161-0007
    $114.52 - $114.52
    $114.52
    $114.52 - $114.52
    $114.52

    UNI-HUB 7 COULTER HUB (Hub, Collar, Dust Cap, Washer, Nut, Seal Ring)

    35mm shaft. 95mm PCD with 5 studs Supplied with Hub, Wheel Nuts, Studs Collar and Dust Cap, M20 Castle Nut, Washer, Bearing, Seal Ring and Circli...

    View full details
    $114.52 - $114.52
    $114.52
    $114.52 - $114.52
    $114.52
  • SKU: 161-0130
    $45.00 - $45.00
    $45.00
    $60.00
    $60.00 - $60.00
    $60.00

    Uni-Hub 7, Hub Assembly

    Includes Hub, Studs, Nuts, Circlip and Bearing Lug nut 161-0138 Parts are supplied unassembled.

    $45.00 - $45.00
    $45.00
    $60.00
    $60.00 - $60.00
    $60.00
  • SKU: 130-4042
    $12.00 - $12.00
    $12.00
    $14.50
    $14.50 - $14.50
    $14.50

    V-bolt M16 100 x 100

    V bolt secures to 100x100 RHS with M16 hardware.

    $12.00 - $12.00
    $12.00
    $14.50
    $14.50 - $14.50
    $14.50
  • SKU: 115-1010
    $3,504.00 - $3,504.00
    $3,504.00
    $4,672.00
    $4,672.00 - $4,672.00
    $4,672.00

    Varibox AD

    The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

    View full details
    $3,504.00 - $3,504.00
    $3,504.00
    $4,672.00
    $4,672.00 - $4,672.00
    $4,672.00
  • SKU: 118-2021
    $127.50 - $127.50
    $127.50
    $170.00
    $170.00 - $170.00
    $170.00

    Varibox BS12 Calibrating dial and hardware

     Varibox BS12 dial and hardware only

    $127.50 - $127.50
    $127.50
    $170.00
    $170.00 - $170.00
    $170.00
  • SKU: 113-1115
    $3,705.00 - $3,705.00
    $3,705.00
    $4,940.00
    $4,940.00 - $4,940.00
    $4,940.00

    Varibox HD

    The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

    View full details
    $3,705.00 - $3,705.00
    $3,705.00
    $4,940.00
    $4,940.00 - $4,940.00
    $4,940.00
  • SKU: 124-3031
    $3,045.97 - $3,045.97
    $3,045.97
    $4,061.29
    $4,061.29 - $4,061.29
    $4,061.29

    Varibox HDS 2 Side Input

    The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

    View full details
    $3,045.97 - $3,045.97
    $3,045.97
    $4,061.29
    $4,061.29 - $4,061.29
    $4,061.29
  • SKU: 124-4047
    $75.60 - $75.60
    $75.60
    $100.80
    $100.80 - $100.80
    $100.80

    Varibox Lever

    Welded assembly for the AD720 and AD120 seed drill drive, secures to the varibox. *Old Part No. 124-447

    $75.60 - $75.60
    $75.60
    $100.80
    $100.80 - $100.80
    $100.80
  • SKU: 113-3173
    $41.76 - $41.76
    $41.76
    $55.68
    $55.68 - $55.68
    $55.68

    VARIBOX TENSIONER

    $41.76 - $41.76
    $41.76
    $55.68
    $55.68 - $55.68
    $55.68
  • SKU: 680-4142
    $226.88 - $226.88
    $226.88
    $302.50
    $302.50 - $302.50
    $302.50

    VERTICAL DRIVE SPROCKET (0207024-05)

    $226.88 - $226.88
    $226.88
    $302.50
    $302.50 - $302.50
    $302.50
  • SKU: 111-3024
    $231.41 - $231.41
    $231.41
    $308.55
    $308.55 - $308.55
    $308.55

    VERTICAL SHANK EXTENSION

    Part of the 'Shark Tooth' assemblies 111-2020 and 111-2022. This component sets the depth of the #8 shank in the assembly. *Old Part No. 111-324

    $231.41 - $231.41
    $231.41
    $308.55
    $308.55 - $308.55
    $308.55
  • SKU: 135-1050
    $1.14 - $1.14
    $1.14
    $1.53
    $1.53 - $1.53
    $1.53

    WASHER FLAT 1" 1.7/8"ODx14gThick

    Metric size 25ID 48OD, 2mm thickness

    $1.14 - $1.14
    $1.14
    $1.53
    $1.53 - $1.53
    $1.53
  • SKU: 135-1010
    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90

    WASHER FLAT 3/4" Thick ZINC F436

    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90
}