Products

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...

20" shank suited to the #7 Spring Jump Shank Assembly. Shank has a 400mm maximum working depth.Available Blades:Blade Tungsten TiledBlade Tungsten ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank suited to the #8 Hydraulic Shank, Rigid Shank, and Spring Jump Shank assemblies.The 24" shank has a 450mm maximum working depth. A 30" shank ...

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 150 x 150mm RHS frames. *Old Part No. 005-108

Shank Carrier for the #8 Rigid Shank Assembly 150x150 and 178x178. *Old Part No. 020-204

This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The #9 blade is the superior ...

BACKORDER: Stock ETA TBC This shank fits into all #8 shank assemblies and enables the user to utilize the current #9 blades and #9 shinguards. The ...

BACKORDER: Stock ETA TBC The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank...

BACKORDER: Stock ETA TBC This 30" shank fits into hydraulic #8 shank and hydraulic #1 shank assemblies and enables the user to utilise current #9 b...

BACKORDER: Stock ETA TBC The #9 blade is the superior ripping blade and coupled with the #9 shinguard which gives full face protection to the shank...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

Shank suited to the #9 hydraulic and rigid shank assemblies. This shank has a 450mm maximum working depth in ideal conditions. The #9 Shank feature...

This support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402  

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Shank for the #9 Inversion Shank Assembly. It is available in 450 or 600mm shank lengths. The inversion shank is designed to lift soil from the b...

Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...

Shank suited to the #9 hydraulic and rigid shank assemblies. The #9 Shank features a narrow blade that allows effective subsoil fracturing and has ...