Products

This rollpin measures at 11.11mm in diameter, is 57.15mm long and is used in the #9 hydraulic assembly on the Dogbone pin and on the Hydraulic Pivo...

Bean rollers are an alternative seed roller assembly. They have deeper ribs to allow it to handle beans and larger seeds. They are typically instal...

This plastic bearing assembly holds the feed roller hex shaft. Includes the bearing insert and the housing. It is fastened to the valley with a Pos...

Repair part for roller assembly single gate housing. Old Part Number 114-495

Suits machines with double gate housings (4 feed rollers per row). This housing is fastened to the hopper with a Stainless Screw Tek. 131-1041 [scr...

This Roller Assembly Gate suits both single and double gate housings Old Part Number: 115-414

Restrictor stop, suits all Agrowplow feed rollers, 2 per feed roller Old Part Number: 115-401

Seed roller, suits both single and double gate housings. Old Part Number115-301

Roller assembly housings for Agrowdrill seed boxes to suit the single-gate system.Suits the Original Agrowdrill and a couple of later models. This ...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here. The roller hex shaft ...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here. The roller hex shaft...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

Alt. Part SKU 133-165

SEAL suits AP81 and AP91 machines hubs and pre-2022 Chaser Bins. Seal suits KHitch hub assemblies

Seal kit suits cylinder 153-0024

These seals suit the current #9 cylinder and come as a complete kit. Suits 153-4204 & 153-4217

Seal kit to suit the #8 and #1 hydraulic cylinder 153-4200 *Old Part No. 154-343

Second seed tube that enables double-chuting on tyne-based Agrowdrills. SUITS: 552, 425, 325, 732, and 700 tyne models Seed hose with an outside d...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Also ...

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Also ...

Clutch slide fitted with roll pins, grease nipple and spring. This component fits in the AD230 and AD730 clutch assemblies. This part supersedes 64...

Replacement window to suit the AD130 and AD230

Dual seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 38mm (1½ inch) in diameter. Also available with dual 31.75 mm (1¼ inch) ...

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies. The 21" shank has a 400mm maximum working depth.A 24" shank which has a 475mm maximum wor...

Shank suited to the #1 Rigid and #1 Hydraulic Assemblies . The 24" shank has a 475mm maximum working depth.A 21" shank which has a 400mm maximum wo...