Skip to content
LIMITED AD640 LAUNCH SPECIAL: First 5 units only! CHOOSE YOUR DEAL →
LIMITED AD640 LAUNCH SPECIAL: First 5 units only! CHOOSE YOUR DEAL →
ABOUT AGROWPLOW CONTACT US SEED DRILL CALIBRATION

Products

Filters

  • SKU: 115-1019
    Multiple SKU variants are available for this product
    $198.00 - $198.00
    $198.00
    $264.00
    $264.00 - $264.00
    $264.00

    Coil Tyne 325

    25mm coil tyne used as part of the Agrowdrill 325 Coil Tyne assembly on ADx20 series Agrowdrill direct drills. Use point adaptor 115-4009 to fit b...

    View full details
    $198.00 - $198.00
    $198.00
    $264.00
    $264.00 - $264.00
    $264.00
  • SKU: 453-4002
    Multiple SKU variants are available for this product
    $202.55 - $202.55
    $170.75
    $227.67
    $270.07 - $270.07
    $227.67

    Coil Tyne 425

    25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits AD083, AD130/140, AD230/240 Agrowdrills. Made in Australia. Download: Pa...

    View full details
    $202.55 - $202.55
    $170.75
    $227.67
    $270.07 - $270.07
    $227.67
  • SKU: 115-3119
    Multiple SKU variants are available for this product
    $183.75 - $183.75
    $183.75
    $245.00
    $245.00 - $245.00
    $245.00

    Coil Tyne 700

    25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts....

    View full details
    $183.75 - $183.75
    $183.75
    $245.00
    $245.00 - $245.00
    $245.00
  • SKU: 114-3119
    Multiple SKU variants are available for this product
    $223.50 - $223.50
    $223.50
    $298.00
    $298.00 - $298.00
    $298.00

    Coil Tyne 732

    Heavy duty coil tyne used in the 732 Coil Tyne Assembly. The coil has a 32mm diameter and suits the 732 baker boot point.  Made in Australia

    $223.50 - $223.50
    $223.50
    $298.00
    $298.00 - $298.00
    $298.00
  • SKU: 115-2018
    Multiple SKU variants are available for this product
    $134.17 - $134.17
    $134.17
    $178.89
    $178.89 - $178.89
    $178.89

    Coil Tyne, Self-Aligning Coulter

    This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...

    View full details
    $134.17 - $134.17
    $134.17
    $178.89
    $178.89 - $178.89
    $178.89
  • SKU: 125-3052
    $91.72 - $91.72
    $91.72
    $122.30
    $122.30 - $122.30
    $122.30

    Control Arm

    Control arms used in the #1 and #8 Hydraulic Assemblies Old Part No. 125-352

    $91.72 - $91.72
    $91.72
    $122.30
    $122.30 - $122.30
    $122.30
  • SKU: 140-4032
    $31.28 - $31.28
    $31.28
    $41.70
    $41.70 - $41.70
    $41.70

    CONTROL ARM PIN

    *Old Part No. 140-432

    $31.28 - $31.28
    $31.28
    $41.70
    $41.70 - $41.70
    $41.70
  • SKU: 125-0098
    $92.55 - $92.55
    $92.55
    $123.40
    $123.40 - $123.40
    $123.40

    COULTER ARM

    $92.55 - $92.55
    $92.55
    $123.40
    $123.40 - $123.40
    $123.40
  • SKU: 125-0029
    $94.75 - $94.75
    $94.75
    $126.33
    $126.33 - $126.33
    $126.33

    Coulter Arm 12"

    Support arm that mounts a 12" coulter disc to the coulter shaft. *Old Part No. 125-029

    $94.75 - $94.75
    $94.75
    $126.33
    $126.33 - $126.33
    $126.33
  • SKU: 125-0029
    $94.75 - $94.75
    $94.75
    $126.33
    $126.33 - $126.33
    $126.33

    Coulter Arm 12"

    Support arm that mounts a 12" coulter disc to the coulter shaft. *Old Part No. 125-029

    $94.75 - $94.75
    $94.75
    $126.33
    $126.33 - $126.33
    $126.33
  • SKU: 125-0099
    $114.33 - $114.33
    $114.33
    $152.44
    $152.44 - $152.44
    $152.44

    Coulter Arm 14"

    Support arm that mounts a 14" coulter disc assembly to the coulter shaft. *Old Part No. 125-099

    $114.33 - $114.33
    $114.33
    $152.44
    $152.44 - $152.44
    $152.44
  • SKU: 125-0099
    $114.33 - $114.33
    $114.33
    $152.44
    $152.44 - $152.44
    $152.44

    Coulter Arm 14"

    Support arm that mounts a 14" coulter disc assembly to the coulter shaft. *Old Part No. 125-099

    $114.33 - $114.33
    $114.33
    $152.44
    $152.44 - $152.44
    $152.44
  • SKU: 190-0003
    $292.21 - $292.21
    $292.21
    $389.61
    $389.61 - $389.61
    $389.61

    Coulter Assembly 12" for #7 and #Econo Shanks

    12" Coulter assembly to suit the following spring jump shank assemblies: #7 shank spring jump assembly#econo shank spring jump assembly  Parts supp...

    View full details
    $292.21 - $292.21
    $292.21
    $389.61
    $389.61 - $389.61
    $389.61
  • SKU: 004-2002
    $39.47 - $39.47
    $39.47
    $52.62
    $52.62 - $52.62
    $52.62

    Coulter Clamp #Econo

    $39.47 - $39.47
    $39.47
    $52.62
    $52.62 - $52.62
    $52.62
  • SKU: 192-0034
    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92

    COULTER COLLAR

    $40.44 - $40.44
    $40.44
    $53.92
    $53.92 - $53.92
    $53.92
  • SKU: 030-4050
    $48.84 - $48.84
    $48.84
    $65.12
    $65.12 - $65.12
    $65.12

    Coulter Disc 12" (Plough) C1211

    12" (305mm) plain coulter disc for deep tillage plough with an 55mm ID. This disc has 5 x 7/16" holes on a 95mm PCD Coulter discs are the active pa...

    View full details
    $48.84 - $48.84
    $48.84
    $65.12
    $65.12 - $65.12
    $65.12
  • SKU: 191-1015
    $54.75 - $54.75
    $54.75
    $73.00
    $73.00 - $73.00
    $73.00

    Coulter Disc 12" Fluted

    12" coulter disc fluted for seed drill. For plain coulter disc, use 030-4050. This disc has a PCD of 95mm.

    $54.75 - $54.75
    $54.75
    $73.00
    $73.00 - $73.00
    $73.00
  • SKU: 191-1014
    $56.10 - $56.10
    $56.10
    $74.80
    $74.80 - $74.80
    $74.80

    Coulter Disc 13" Fluted

    12" FLUTED AGROWPLOW COULTER FOR SEED DRILL PCD 95mm with 5 Studs DWG 030-4055, ASP-08711  ASP lists this part as 12"

    $56.10 - $56.10
    $56.10
    $74.80
    $74.80 - $74.80
    $74.80
  • SKU: 030-4051
    $52.50 - $52.50
    $52.50
    $70.00
    $70.00 - $70.00
    $70.00

    Coulter Disc 14" (Plough) C 1411

    14" (355mm) plain coulter disc with an 55mm ID for deep tillage plough. This disc has 5 x 7/16" bolt holes on a 95mm PCD. Coulter discs are the act...

    View full details
    $52.50 - $52.50
    $52.50
    $70.00
    $70.00 - $70.00
    $70.00
  • SKU: 190-2005
    $154.87 - $154.87
    $154.87
    $206.50
    $206.50 - $206.50
    $206.50

    Coulter Disc Assembly 12" (Plough)

    12" coulter disc assembly for deep tillage plough. Supplied with bearings, bearing housing, 12" coulter disc and hardware.  Coulter discs are the ...

    View full details
    $154.87 - $154.87
    $154.87
    $206.50
    $206.50 - $206.50
    $206.50
  • SKU: 190-2020
    $177.68 - $177.68
    $177.68
    $236.91
    $236.91 - $236.91
    $236.91

    Coulter Disc Assembly 14" (Plough)

    14" coulter disc assembly for deep tillage plough. Supplied with bearings, bearing housing, 14" coulter disc and hardware.  Coulter discs are the a...

    View full details
    $177.68 - $177.68
    $177.68
    $236.91
    $236.91 - $236.91
    $236.91
  • SKU: 192-0028
    $158.70 - $158.70
    $158.70
    $211.60
    $211.60 - $211.60
    $211.60

    Coulter Shaft

    Mounting shaft that supports a 12" or 14" swivel plough coulter disc assembly and mounts to the plough clamp plate. *Old Part No. 192-028

    $158.70 - $158.70
    $158.70
    $211.60
    $211.60 - $211.60
    $211.60
  • SKU: 125-0027
    $100.65 - $100.65
    $100.65
    $134.20
    $134.20 - $134.20
    $134.20

    COULTER SIDE PLATE RIDGED SHANK

    $100.65 - $100.65
    $100.65
    $134.20
    $134.20 - $134.20
    $134.20
  • SKU: 142-4010
    $26.25 - $26.25
    $26.25
    $35.00
    $35.00 - $35.00
    $35.00

    Coulter Sleeve

    *Old Part No. 142-410

    $26.25 - $26.25
    $26.25
    $35.00
    $35.00 - $35.00
    $35.00
}