AD083 Agrowdill

25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits AD083, AD130/140, AD230/240 Agrowdrills. Made in Australia. Download: Pa...

SKF Carbon steel drive chain. Comes in a 3m length. Half link or joiner links may be required.Some sprocket drive assemblies also utilise an 08B du...

This plastic bearing assembly holds the feed roller hex shaft. Includes the bearing insert and the housing. It is fastened to the valley with a Pos...

Varibox decals for ADx30 series Agrowdrills.  Decals are printed white on clear and die-cut.   

Suits machines with double gate housings (4 feed rollers per row). This housing is fastened to the hopper with a Stainless Screw Tek. 131-1041 [scr...

Gate decals for AD140, AD240 and ADx30 series Agrowdrills.  Decals are printed white on clear and die-cut.   

Seed tube to suit the Agrowdrill 435 Coil Tyne assembly. Fits 38mm Barflo seed hose 219-4010. Single chute seeding suits seed cup 113-3112. NOTES: ...

Roller assembly housings for Agrowdrill seed boxes to suit the single-gate system.Suits the Original Agrowdrill and a couple of later models. This ...

SKF Carbon steel drive chain. Comes in a 3m length.  ANSI Chain Size: 08B-2 Strands: Single Pitch (mm): 12.7 or 1/2" A single 08B chain can be...

Farmscan area meter sensor. Includes packard connection wth tail and mounting bracket. *Old Part No. 114-463

Premium fabricated hardfaced baker boot point to suit the 425 Coil Tyne assembly. Manufactured in Australia from 6mm Bisalloy plate, this point is ...

Farmscan shaft magnet. *Old Part No. 114-484

This Offset Mount is to suit older AD083 models and has been designed to have 3 x M8 bolts attaching it to the AD083 drive sprocket. This item is ...

This spring tension bar fits in the 401 double disc and 251 tyne assemblies. It secures the spring to the mounting carrier and the swing arm.

Part of the spring stem of the 401 and 251 disc assemblies. This part fits at the top of the spring stem and fits under the rubber cushion.

This retaining washer fits the top of the spring stem in the 401 disc and 251 tyne assemblies.

Part of the 401 disc and 251 tyne assemblies, this component fits on the spring stem and secures the end of the spring.

Engineering plastic locator for the spring of the 251 spring tyne assembly and 401 disc assembly.

Swivel pin which secures the carrier to the swing arm on the 401 disc assembly and the 251 tyne.

This is a full parts set for the 401 Double Disc assembly. The kit comes with mounting, hardware, and discs. Bulk discounts are available for mult...

This is a full parts kit for our 150mm dual-wheel presswheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets...

This is a full parts kit for our 125mm dual-wheel presswheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets...

This is a full parts kit for our single-wheel press wheel assembly for mounting to 65x65mm RHS.  Bulk discounts are available for multiple sets. C...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...

16" Plain Disc used on the 401 Double Disc assembly (408-1001) Each 401 assembly requires a plain disc and a notched disc (408-4001). The offset de...

16" Notched Disc used on the 401 Double Disc assembly (408-1001) Each 401 assembly requires a plain disc (408-4002) and a notched disc. The offset ...

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

AD083 decal. Measures 240x46mm. Pale grey die-cut vinyl.

Bean rollers are an alternative seed roller assembly. They have deeper ribs to allow it to handle beans and larger seeds. They are typically instal...

Part of the 401 double-disc unit this is the swing arm which mounts to the RHS carrier and holds the disc assemblies.

Suits the 251 tyne and 401 disc assemblies. Secures the spring stem to the tyne arm or disc arm.

Fits the 401 disc and 251 tyne, this component centralized the bottom of the spring on the spring stem.

This dust cap fits the 401 disc assembly and covers the end of the bearing hub where it mounts through the disc.

This felt seal fits the 401 double disc assembly in the disc mounting, protecting the bearing hub from ingress of dust and grit.

This bearing mount fits the 401 disc assembly and secures the hubs which the discs bolt to.

This spacer fits the 401 disc assembly and offsets the hub assemblies which the discs attach to.

Spring tension bar for the 401 disc and 251 tyne assembly. This tension bar was specific to early production and has since been upgraded to 408-413...

RHS mounting plate clamping bracket.

RHS mounting carrier for 251 spring tyne and 401 disc assembly.

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...