Agrowdrill

This plastic bearing assembly holds the feed roller hex shaft. Includes the bearing insert and the housing. It is fastened to the valley with a Pos...

Repair part for roller assembly single gate housing. Old Part Number 114-495

Suits machines with double gate housings (4 feed rollers per row). This housing is fastened to the hopper with a Stainless Screw Tek. 131-1041 [scr...

This Roller Assembly Gate suits both single and double gate housings Old Part Number: 115-414

Restrictor stop, suits all Agrowplow feed rollers, 2 per feed roller Old Part Number: 115-401

Seed roller, suits both single and double gate housings. Old Part Number115-301

Roller assembly housings for Agrowdrill seed boxes to suit the single-gate system.Suits the Original Agrowdrill and a couple of later models. This ...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here. The roller hex shaft ...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here. The roller hex shaft...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

Second seed tube that enables double-chuting on tyne-based Agrowdrills. SUITS: 552, 425, 325, 732, and 700 tyne models Seed hose with an outside d...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Also ...

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Also ...

Clutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly. This part supersedes 640-4077. I...

Replacement window to suit the AD130 and AD230

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...

Suits a stand alone small seed box or one fitted to a pasture seeder. Designed to have a stainless 1/2" hex shaft go through the sprocket. If the S...

Suits a small seed box fitted to a seed drill. Designed to have a stainless 1/2" hex shaft go through the sprocket. If the SSB is stand-alone or fr...

Small seed roller assembly that suits the Agrowdrill and Davimac small seeds box.

This spacer ring has an ID of 60mm and is primarily used on Drive & Wheel arm assemblies.

Swing arm which secures the tyne in the 551 heavy-duty shank assembly.