Agrowplow

Agrowdrill logo decal for seed drills and small seed boxes. Decals are pale grey on die-cut vinyl.  Each decal may suit multiple machine models. C...

Agrowplow logo in pale grey. Comes on die-cut vinyl. Refer to your parts manual for the correct size for your plough.

AP10 model decal. Pale grey on die-cut, vinyl sticker.

AP11 model decal. Pale grey on die-cut, vinyl sticker. 358x75mm

AP30 model decal. Pale grey on die-cut, vinyl sticker.

AP31 model decal. Pale grey on die-cut, vinyl sticker. 358x75mm

AP51 model decal. Pale grey on die-cut, vinyl sticker. 550x115mm

AP70 model decal. Pale grey on die-cut, vinyl sticker.

AP71 model decal. Pale grey on die-cut, vinyl sticker. 413x115mm

AP81 model decal. Pale grey on die-cut, vinyl sticker.479x115mm

AP90 model decal. Pale grey on die-cut, vinyl sticker.

AP91 decal. Measures 456x115mm. Pale grey die-cut vinyl.

"Soil Renovator" decal for Agrowplow deep tillage ploughs. Light grey on die-cut vinyl. 350 x 30 mm

'Chemical Hazard' warning sticker. 90x50mm yellow and black sticker.

'Projectile' warning sticker. 89x50mm yellow and black sticker.

'Tyre or wheel explosion hazard' warning sticker. 89x50mm yellow and black sticker.

Fertiliser tubes allow for the delivery of fertiliser directly behind the plough shank. They can be fitted to the #9 shank assembly or any shank wi...

The furrower assembly fits to the rigid or hydraulic #8 or #9 Shank Assembly. It is designed to generate furrows and hills for raised bed cropping....

The furrower blades form part of the ground engaging component from the furrower assembly (123-0003). The blades generate furrows and hills for rai...

The furrower pitch plate fits to the #8 shank and secures the furrower blade (111-1006) with the use of the Tee Bolt (132-0060). Part of the furrow...

The Furrower Tee Bolt secures the Furrower Blades (111-1006) to the Furrower Pitch Plate (111-2005) as part of the Furrower Assembly 123-0003. *O...

(141-4013) #9

Hardfaced inversion point for the AP102 plough. Should be fitted on the HD Shank alongside the inversion shinguard.

Hardfaced inversion shinguard for the AP102 plough's HD Shank. Should be fitted on the HD Shank alongside the inversion point.

Built exclusively for the AP102 deep ripper, this heavy-duty hardfaced point is built tough and ready for the rigours of ripping down to 750 mm.

Hose clamp is utilised on the 425 Tyne Assembly to hold the 38mm Barflo hose onto the Seed tube.

Part equivalent to 153-4304.

3/4" JIC MALE, 3/4" UN O RING MALE

HYDRAULIC FLUID PORT REDUCING BUSHES 2" TO 3/4" BSPPF

Used in the #8 and #1 Hydraulic Assemblies. Fits in the port of cylinder 153-4200.

Used in the #9 Assemblies.

1.1/4" diameter pin, 5" working width. Pin suits the #8 shank and #1 shank hydraulic recoil assemblies. See 120-0001, 120-0003, 120-0007, 005-10...

Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...

Fabricated part equivalent to 154-0016. Used on hydraulic cylinder 153-4208 in tandem with brass flow restrictor USE 154-0016

Hydraulic jump cylinder for the Agrowplow #1 and 8 hydraulic shank assemblies. Has a 2.1/2" bore and a 9" rod displacement. 

Suits #9 hyd shank

Hydraulic stroke control segments stop the hydraulic cylinder from closing by increments. On a phasing set, only the drive cylinder needs to be con...

This idle shaft is made out of 25.4mm (1") Stainless steel and is 315mm long. It has a key-way machined in the entire length of the shaft for secur...