Agrowdrill Components

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here.The gate hex shaft is ...

Special washers made for the seed box on Agrowdrills. Used on the gate arms and varibox adjustment arms.

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

SKF Carbon steel drive chain. Comes in a 3m length. Joiner links may be required. ANSI Chain Size: 10B-1 Strands: Single Pitch (mm): 15.875 or 5/8"...

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

Alt. Part SKU 115-716

M18 threaded wheel nut, 1.5 pitch (fine thread). Total length is 65mm, useable thread is 40mm. Knurl is 19.5mm OD and 15mm Long Alt. Part SKU 115-717

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

M20 U-Bolt to secure to 150x200 RHS.

Ratchet ram used to adjust the operating and transport height of a range of Agrowplow products including Agrowdrill seed drills, Agrowdrill coulter...

This hub component suits the AGR HUB 1, tapered bearing coulter hub assembly 139-4200. Stud to suit 139-4201, Nut to suit stud 139-2027. The ta...

Suits Agr-Hub 1

This spacer ring has an ID of 60mm and is primarily used on Drive & Wheel arm assemblies.

(x2) offsets are required to update an AD230. This is intended to shift the front tynes forward by 150mm in the case that the tyne is fitted with d...

This M16 U-Bolt is grade 8.8 and is used to secure to 100x100 RHS. It has 55mm of working thread and an overall length of 152mm from the inside fac...

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Wheel nut used on Titan hub 90-8

Heavy-duty cast baker boot point to fit various seed drills. There are two diamond-edged tiles on the leading edge with hardfacing on the sides beh...

Seed tube for the 400 Pasture Disc Assembly (see 405-1000 for complete unit). Part only, no nuts or bolts supplied with this part. Fits 38mm barf...

Alt. Part SKU 132-225

Alt. Part SKU 116-415

Alt. Part SKU 116-319

Suits small seed box.

Suits small seed box.