ALL STATES & TERRITORIES
Suits bearing housing, 138-0053
*Old Part No. 133-157
*Old Part No. 133-157
Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in see...
View full detailsIndustrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance free bush. Used in som...
View full detailsIndustrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...
View full detailsCalibration handle to suit the AD230 Seed drill. It comes zinc plated and assembled with plastic piping installed.
Adapts baker boot point to the 325 coil tyne. Carrier requires bolt one 1/2" x 2.1/2" UNC G8 Zinc (133-1090), one hex nut 1/2" UNC zinc (134-0070)...
View full detailsHalf link to suit chain 08B. Also see joiner link 115-7011. *Old Part No. 115-710
Joiner link to suit chain 08B. Also see half link 115-7010. *Old Part No. 115-711
SKF Carbon steel drive chain. Comes in a 3m length. Half link or joiner links may be required.Some sprocket drive assemblies also utilise an 08B du...
View full detailsSKF Carbon steel drive chain. Comes in a 3m length. ANSI Chain Size: 08B-2 Strands: Single Pitch (mm): 12.7 or 1/2" A single 08B chain can be fou...
View full detailsJoiner link to suit 10B chain. Alternate Part No.137-160
SKF Carbon steel drive chain. Comes in a 3m length. Joiner links may be required. ANSI Chain Size: 10B-1 Strands: Single Pitch (mm): 15.875 or 5/8"...
View full detailsThis clutch chain guide is 40mm long, made out of 50mm OD nylon and has a 9mm hole drilled through the centre. Alternate Part No.385-480
Chain Tensioner Block made out of 50mm engineering plastic and tapped with a M10 hole
This chain tensioner is made out of a 30mm nylon shaft and is 32mm long.
Mild steel welded part. Chain tensioner used in seed drill drive assemblies to secure the nylon chain tensioner in position.
Suits all Agrowdrills with electric clutch *Old Part No. 160-433
This is a roller component in the clutch assembly. It is machined out of 65mm diameter self-lubricated engineering plastic and has an overall lengt...
View full detailsClutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly.
25mm coil tine used as part of the Agrowdrill 325 Coil Tyne assembly. Use point adaptor 115-4009 to fit baker boot points. Made in Australia Old Pa...
View full details25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits the AD083, AD130, AD140, and AD230 Agrowdrill seeders. Made in Australia.
25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts. ...
View full detailsHeavy duty coil tyne used in the 732 Coil Tyne Assembly. Has a 32mm diameter and suits the 732 baker boot point. Made in Australia
This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...
View full detailsFor plain coulter disc, us 030-4050
Mounting shaft that supports a 12" or 14" swivel plough coulter disc assembly and mounts to the plough clamp plate. *Old Part No. 192-028
*Old Part No. 142-410
Suits double coulter units Spring rate is 260.85N/mm *Old Part No. 132-301
Coulter Spring Keeper used as part of the #7 Spring Jump and #8 Spring Jump assemblies. Old Part No. 003-304
*Old Part No. 395-313