ALL STATES & TERRITORIES
The 700 Coil Tyne was a tyne assembly used on earlier model Agrowdrills, including the AD3000, ADx00 series drills, and JPC 2000. It used a 25mm co...
View full detailsThe 732 Coil Tyne Assembly is a heavy-duty tyne assembly used on some older model Agrowdrill direct drills, including the AD3000, ADx00 series mach...
View full detailsFastener kit for the 732, 700, 425, and 325 tyne assemblies. Used to secure the tyne bolt clamp (115-3009). Includes an M16x200 bolt, plus a nut an...
View full detailsTyne clamp used as part of a tyne clamp assembly to secure Agrowdrill tynes to the machine toolbar. Suits 100mm x100mm RHS, for all 25mm coil sprin...
View full detailsSuits 732 tyne
Tyre and rim to suit the Agrowdrill AD230, AD240 or CP62 Cotton Plough.
M12 U-Bolt to secure to 50x50 RHS, galvanised with 62mm hole centres. Used on the AD130, AD230 and AD730 to secure the small seed box down tube b...
View full detailsThis M16 U-Bolt is grade 8.8 and is used to secure to 100x100 RHS. It has 55mm of working thread and an overall length of 152mm from the inside fac...
View full detailsM20 U-Bolt to secure to 100x100 RHS. Used on the AD230 rear tow hitch. Passivated parts may be supplied with zinc plating and vise versa.
M20 U-Bolt to secure to 100x195 RHS. Passivated parts may be supplied with zinc plating and vise versa.
Uni-Hub 1 assembly. Includes hub, cap, washer, nut, and split pin. The Uni-Hub 1 is a 5-stud 37mm hub with 107.9mm PCD.
35mm shaft. Hub, 107.9mm PCD with 5 studs. Supplied with M20 Nylock Nut, Washer ID20/OD45/6mm, Hub cap. Dust cap part number 161-0101
This dust cap fits the 401 disc assembly and covers the end of the bearing hub where it mounts through the disc.
35mm shaft. Hub, 107.9mm PCD with 5 studs. For the full assembly including castle nut and hub cap see part 161-0004. This component is the hub with...
View full details35mm shaft. 95mm PCD with 5 studs Supplied with Hub, Wheel Nuts, Studs Collar and Dust Cap, M20 Castle Nut, Washer, Bearing, Seal Ring and Circli...
View full detailsIncludes Hub, Studs, Nuts, Circlip and Bearing Lug nut 161-0138
The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...
View full detailsVaribox BS12 dial and hardware only
The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...
View full detailsThe varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...
View full detailsWelded assembly for the AD720 and AD120 seed drill drive, secures to the varibox. *Old Part No. 124-447
Special washers made for the seed box on Agrowdrills. Used on the gate arms and varibox adjustment arms.
Zinc Plated/Passivated flat washer to suit M16 nuts and bolts.