Agrowdrill

Clutch drive component for the AD230 and AD730 machines. Comes zinc-plated to reduce wear and increase the overall longevity of the drive.

Lever and pull assembly mounting shaft that forms part of the AD230 clutch assembly.

Clutch update kit for the AD230. Designed to improve clutch longevity and make calibration easier.  The kit includes a redesigned clutch slide with...

This levelling tube assembly is made to order and suits the AD230. Lead times are 1-2 weeks from placement of order.

Rear tow hitch for the Agrowdrill AD230 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD730 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Coulter discs are the active part of a coulter assembly responsible for cutting through trash ahead of the shank assembly on a seed drill. Agrowdri...

An Agrowplow denim baseball trucker cap with a Medium Profile Crown. This cap is coloured Agrowplow blue and has 2 colour bands around the back: g...

Baker boot point for 425 Coil Tyne assemblies. The popular baker boot produces an inverted 'T' groove in the soil, creating an ideal micro-climate ...

Baker boot point to suit the 700 Coil Tyne Assembly. The popular Baker Boot produces an inverted 'T' groove - an ideal micro-climate for seed germi...

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Bearing Housing, suits bearing 138-1033.

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...

This spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Suits bearing housing, 138-0053

*Old Part No. 133-157

*Old Part No. 133-157

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in see...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance free bush. Used in som...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...

Adapts baker boot point to the 325 coil tyne. Carrier requires bolt one 1/2" x 2.1/2" UNC G8 Zinc (133-1090), one hex nut 1/2" UNC zinc (134-0070)...

Half link to suit chain 08B. Also see joiner link 115-7011. *Old Part No. 115-710

Joiner link to suit chain 08B. Also see half link 115-7010. *Old Part No. 115-711

SKF Carbon steel drive chain. Comes in a 3m length. Half link or joiner links may be required.Some sprocket drive assemblies also utilise an 08B du...

SKF Carbon steel drive chain. Comes in a 3m length.  ANSI Chain Size: 08B-2 Strands: Single Pitch (mm): 12.7 or 1/2" A single 08B chain can be fou...

This clutch chain guide is 40mm long, made out of 50mm OD nylon and has a 9mm hole drilled through the centre. Alternate Part No.385-480

Chain Tensioner Block made out of 50mm engineering plastic and tapped with a M10 hole

This chain tensioner is made out of a 30mm nylon shaft and is 32mm long.

Mild steel welded part. Chain tensioner used in seed drill drive assemblies to secure the nylon chain tensioner in position.

Suits all Agrowdrills with electric clutch *Old Part No. 160-433

This is a roller component in the clutch assembly. It is machined out of 65mm diameter self-lubricated engineering plastic and has an overall lengt...

Clutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly.

25mm coil tine used as part of the Agrowdrill 325 Coil Tyne assembly. Use point adaptor 115-4009 to fit baker boot points. Made in Australia Old Pa...

25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits the AD083, AD130, AD140, and AD230 Agrowdrill seeders. Made in Australia.

25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts. ...