Agrowdrill

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

The heavy-duty spring tyne assembly with 720mm of frame clearance and 550 pounds break out. Assembly comes with mounting and point. Seed tube, seed...

Tyne stem which secures into the swing arm of the 551 HD Spring Tyne Assembly for the AD730. This is a female stem that suits a male point such as ...

552 HD Spring Tyne seed and fertilser delivery tube. This part fixes to the back of the spring tyne stem and delivers the material from the 38mm Ba...

Male tyne stem to suit the 552 HD Tyne Assembly. It supersedes the female tyne equivalent 409-3006 for the 551 HD Tyne Assembly. This stem comes wi...

Second seed tube that suits both 700 and 732 Coil Tyne Assemblies. Has an outside diameter of 38mm (1-1/2"). Supplied with mounting hardware (2 x ...

Single seed tube that suits the 700 Coil Tyne. The outside diameter of tube is 38mm (1-1/2") and it has mounting hole threaded with 5/16" UNC.

Clamp assembly to mount the 732 coil tyne to the toolbar. Ships with clamp plate, U-bolts, and hardware.

Single seed tube that suits the 732 Coil Tyne. The outside diameter of tube is 38mm (1-1/2") and it has mounting hole threaded with 3/8" UNC.  Supp...

Farmscan area meter sensor. Includes packard connection wth tail and mounting bracket. *Old Part No. 114-463

This Offset Mount is to suit older AD083 models and has been designed to have 3 x M8 bolts attaching it to the AD083 drive sprocket. This item is m...

Suits the AD100 series coulter. 150mm row spacing, fits to coulter hub 161-0007

Clutch drive component for the AD230 and AD730 machines. Comes zinc-plated to reduce wear and increase the overall longevity of the drive.

Lever and pull assembly mounting shaft that forms part of the AD230 clutch assembly.

Clutch update kit for the AD230. Designed to improve clutch longevity and make calibration easier.  The kit includes a redesigned clutch slide with...

This levelling tube assembly is made to order and suits the AD230. Lead times are 1-2 weeks from placement of order.

Rear tow hitch for the Agrowdrill AD230 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Rear tow hitch for the Agrowdrill AD730 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, includi...

Coulter discs are the active part of a coulter assembly responsible for cutting through trash ahead of the shank assembly on a seed drill. The coul...

An Agrowplow denim baseball trucker cap with a Medium Profile Crown. This cap is coloured Agrowplow blue and has 2 colour bands around the back: g...

Baker boot point for 425 Coil Tyne assemblies. The popular baker boot produces an inverted 'T' groove in the soil, creating an ideal micro-climate ...

Baker boot point to suit the 700 Coil Tyne Assembly. The popular Baker Boot produces an inverted 'T' groove - an ideal micro-climate for seed germi...

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Bearing Housing, suits bearing 138-1033.

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...

This spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Suits bearing housing, 138-0053