ALL STATES & TERRITORIES
Baker boot point to suit the 700 Coil Tyne Assembly. The popular Baker Boot produces an inverted 'T' groove - an ideal micro-climate for seed germi...
View full detailsIndustrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance free bush. Used in som...
View full detailsIndustrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...
View full detailsAdapts baker boot point to the 325 coil tyne. Carrier requires bolt one 1/2" x 2.1/2" UNC G8 Zinc (133-1090), one hex nut 1/2" UNC zinc (134-0070)...
View full details25mm coil tine used as part of the Agrowdrill 325 Coil Tyne assembly. Use point adaptor 115-4009 to fit baker boot points. Made in Australia Old Pa...
View full details25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits the AD083, AD130, AD140, and AD230 Agrowdrill seeders. Made in Australia.
25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts. ...
View full detailsHeavy duty coil tyne used in the 732 Coil Tyne Assembly. Has a 32mm diameter and suits the 732 baker boot point. Made in Australia
This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...
View full detailsFor plain coulter disc, us 030-4050
Suits double coulter units Spring rate is 260.85N/mm *Old Part No. 132-301
Coulter Spring Keeper used as part of the #7 Spring Jump and #8 Spring Jump assemblies. Old Part No. 003-304
Suits the Pasture Disc 400 assembly 405-1000. Pairs with the 15 notch disc 110-4015. *Old Part No. 110-411
Suits the Pasture Disc 400 assembly 405-1000. Pairs with the 11 notch disc 110-4011. *Old Part No. 110-415
This felt seal fits the 401 double disc assembly in the disc mounting, protecting the bearing hub from ingress of dust and grit.
Lower part of the second seed tube assembly (114-1118). Inserts into the rubber housing and secured with a clip.
Suits 425 tynes and secures the seed tube to the tyne.
551 HD Spring Tyne point. Available in either spear or knife point varieties. Cast metal component with tungsten tiles applied to the front, and si...
View full detailsPoint to suit the 552 HD Spring Tyne Assembly. These points come with tungsten tile and hardfacing to protect the wear surfaces and extend the work...
View full detailsBaker boot point for the 732 Coil Tyne Assembly (114-1107 and 114-1108). The popular baker boot produces an inverted 'T' groove - an ideal micro-cl...
View full detailsSelf Aligning Coulter (SAC) clay opener with baker boot profile and curved front ridge. Suits SAC assemblies 115-3005 and 115-3012.