Agrowdrill

Baker boot point to suit the 700 Coil Tyne Assembly. The popular Baker Boot produces an inverted 'T' groove - an ideal micro-climate for seed germi...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance free bush. Used in som...

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in som...

Adapts baker boot point to the 325 coil tyne. Carrier requires bolt one 1/2" x 2.1/2" UNC G8 Zinc (133-1090), one hex nut 1/2" UNC zinc (134-0070)...

25mm coil tine used as part of the Agrowdrill 325 Coil Tyne assembly. Use point adaptor 115-4009 to fit baker boot points. Made in Australia Old Pa...

25mm coil tyne designed for the Agrowdrill 425 Coil Tyne assembly. Suits the AD083, AD130, AD140, and AD230 Agrowdrill seeders. Made in Australia.

25mm coil tyne that forms part of the 700 Coil Tyne assembly. Requires the 700 baker boot point. Suits single bolt points with 7/16 x 2-1/2 bolts. ...

Heavy duty coil tyne used in the 732 Coil Tyne Assembly. Has a 32mm diameter and suits the 732 baker boot point.  Made in Australia

This tyne suits the Self-Aligning Coulter (SAC) Assembly. It mounts to 100x100 RHS using the standard coil tyne clamp 115-3009. The right-hand ori...

For plain coulter disc, us 030-4050

Suits double coulter units Spring rate is 260.85N/mm *Old Part No. 132-301

Coulter Spring Keeper used as part of the #7 Spring Jump and #8 Spring Jump assemblies. Old Part No. 003-304

Suits the Pasture Disc 400 assembly 405-1000. Pairs with the 15 notch disc 110-4015. *Old Part No. 110-411

Suits the Pasture Disc 400 assembly 405-1000. Pairs with the 11 notch disc 110-4011. *Old Part No. 110-415

This felt seal fits the 401 double disc assembly in the disc mounting, protecting the bearing hub from ingress of dust and grit.

Lower part of the second seed tube assembly (114-1118). Inserts into the rubber housing and secured with a clip.

Suits 425 tynes and secures the seed tube to the tyne.

551 HD Spring Tyne point. Available in either spear or knife point varieties. Cast metal component with tungsten tiles applied to the front, and si...

Point to suit the 552 HD Spring Tyne Assembly. These points come with tungsten tile and hardfacing to protect the wear surfaces and extend the work...

Baker boot point for the 732 Coil Tyne Assembly (114-1107 and 114-1108). The popular baker boot produces an inverted 'T' groove - an ideal micro-cl...

Self Aligning Coulter (SAC) clay opener with baker boot profile and curved front ridge. Suits SAC assemblies 115-3005 and 115-3012.

Used to reduce 38mm seed tube to suit 31.5mm Barflo hose.

Barflo hose reducer to allow 38mm diameter hose to fit a 31.5mm seed tube.

The retaining ring utilised on the 400 Pasture notched disc assembly. Alternate Part No.110-404

Part of the 551 heavy duty spring tyne assembly, this rocker plate fits into the top of the spring mounting.

Suits the 251 tyne and 401 disc assemblies. Secures the spring stem to the tyne arm or disc arm.

Swing arm which secures the tyne in the 551 heavy-duty shank assembly.

The 551 tyne spring guide secures inside the spring between the carrier and the arm.

Part of the 551 heavy duty spring tyne assembly, this nylon sleeve fits into the top of the spring mounting and aligns the rocker plate.

551 tyne assembly spring.

Swivel pin which secures the spring to the swing arm in the 551 heavy duty spring tynes assembly.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

25mm coil tyne assembly used on ADx20 series Agrowdrill direct drills. The assembly includes a clamp to suit 100x100mm RHS, seed boot, and baker bo...

The 425 Coil Tyne is the workhorse of the Agrowdrill family. It features a 25mm coil with the time-tested 425 Baker Boot point for reliable perfo...

The 700 Coil Tyne was a tyne assembly used on earlier model Agrowdrills, including the AD3000, ADx00 series drills, and JPC 2000. It used a 25mm co...

The 732 Coil Tyne Assembly is a heavy-duty tyne assembly used on some older model Agrowdrill direct drills, including the AD3000, ADx00 series mach...

Tyne clamp used as part of a tyne clamp assembly to secure Agrowdrill tynes to the machine toolbar. Suits 100mm x100mm RHS, for all 25mm coil sprin...

Suits 732 tyne

This dust cap fits the 401 disc assembly and covers the end of the bearing hub where it mounts through the disc.