Skip to content

Agrowplow Setup and Maintenance

  • How to upgrade the  #8-9 Hybrid Shank
    December 5, 2022

    How to upgrade the #8-9 Hybrid Shank

    Is your older model Agrowplow Deep Ripper ready for an upgrade?

    We can show you how to quickly change your existing #8 rigid shank undercarriage to our improved #8-9 hybrid model without the expense of updating the machine.

     

    Read now
  • AP91 Machine Setup
    October 12, 2022

    AP91 Machine Setup

    Tools/Equipment Required Basic hand tools 30mm (¾ inch) delve socket 30mm (¾ inch) drive rattle gun Torque wrench capable of 370nm 20L hydraulic oil and drum pump Dealer setup tips at workshop Install A-frame and secure hydraulics Connect to tractor...

    Read now
  • How to purge air from the #9 Hydraulic Shank Assembly
    May 2, 2022

    How to purge air from the #9 Hydraulic Shank Assembly

    Prevent premature wear and ensure correct shank breakout by purging air from your hydraulic system Plough hydraulic systems require consistent hydraulic pressure to ensure the shanks break out at the correct pressure. Air can be introduced into the system through...

    Read now
  • May 2, 2022

    Agrowplow wheel nut torque chart

    Wheel nut torque should be checked as part of pre-start checks to minimise downtime and faults Use the following charts to ensure the wheel nuts on Agroplow deep rippers are torqued correctly. Agrowplow does not warrant faults relating to wheel...

    Read now
Speak to Someone

1300 722 491

Agrowplow Parts

Shop Now

Agrowplow Manuals

Operator and parts manuals

Find a Dealer

Locate your local supplier