Agrowdrill Drive Components

Mild steel welded part. Chain tensioner used in seed drill drive assemblies to secure the nylon chain tensioner in position.

Welded assembly for the AD720 and AD120 seed drill drive, secures to the varibox. *Old Part No. 124-447

Clutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly. This part supersedes 640-4077. I...

Supplied with bearing 138-4020.

Sprocket clutch 30/21T with bearing 138-1100.

The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

35mm shaft. Hub, 107.9mm PCD with 5 studs. For the full assembly including castle nut and hub cap see part 161-0004. This component is the hub with...

Tension spring used in the current AD140 drive assembly. It is made out of 6.3mm Wire Gal, has an OD of 59mm and has around 28 total coils. This sp...

Chain tensioner made in engineering plastic, outer diameter 40mm, 105mm long.

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

Chain tensioner made in engineering plastic, outer diameter 40mm, 135mm long.

Simplex sprocket, suits 08B chain with 20 teeth. Sprocket secures with grub screws to a 50mm shaft. Model SKU: 630-4111; Chain: 08B; Teeth: 20; Sh...

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...

Nylon chain tensioner cut from 70mm rod. Used on seed drill assemblies including the 13 and 18 run Agrowpdrills and the 3000 and 3400 seed drill mo...

25.4mm locking collar used in the seed drill drive assembly.

Suits all Agrowdrills with electric clutch *Old Part No. 160-433

Lever and pull assembly mounting shaft that forms part of the AD230 clutch assembly.

Industrial application plastic bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush. Used in see...

Clutch drive component for the AD230 and AD730 machines. Comes zinc-plated to reduce wear and increase the overall longevity of the drive.

Includes Hub, Studs, Nuts, Circlip and Bearing Lug nut 161-0138

Plate sprocket to suit 08B chain with 30 teeth. Suits seed drill clutch assembly. Old Part No. 660-413

Bearing Housing, suits bearing 138-1033.

Suits bearing housing, 138-0053

Sprocket with two sets of 36 teeth designed for 10B chain. Includes bearing 138-4052.

Farmscan magnet used as part of the metering system. Suits most Agrowdrill models. Used with the Acre Meter Sensor (114-4063). Magnet Assembly AA-...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

This chain tensioner is made out of a 30mm nylon shaft and is 32mm long.

Chain Tensioner used on the JPC 2000. It is 90mm long

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

24 Tooth Simplex sprocket to suit a 10B Chain. It has been machined out to suit a 60mm shaft. Predominately used on the AD95. Alternate Part No. 11...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...